MAX16932BATIS/V+T

Voltage - Supply (Vcc/Vdd):	3.5 V ~ 42 V
Supplier Device Package:	28-TQFN (5x5)
Package / Case:	28-WFQFN Exposed Pad
Operating Temperature:	-40°C ~ 125°C (TJ)
Control Features:	Enable, Frequency Control, Power Good
Serial Interfaces:	--
Clock Sync:	Yes
Synchronous Rectifier:	Yes
Duty Cycle (Max):	98.5%
Frequency - Switching:	1MHz ~ 2.2MHz
Series:	Automotive, AEC-Q100
Output Phases:	2
Number of Outputs:	2
Topology:	Buck
Output Configuration:	Positive
Function:	Step-Down
Output Type:	Transistor Driver
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX16932BATIS/V+T is a DC-DC controller for automotive power applications and can be used for various application fields. It has an integrated Safety Vcc voltage regulator and also provides a pre-charge circuit for the backup-power supply voltage. The MAX16932BATIS/V+T includes all the functions required to manage a load with very high efficiency.The MAX16932BATIS/V+T utilizes synchronous rectification, which provides the highest efficiency possible. It also includes adjustable switching frequency, which enables the power supply design to minimize external component size. The synchronous rectifier is able to achieve efficiencies greater than 95%. In addition, the MAX16932BATIS/V+T also supports user adjustable deadtime control, slope compensation, current limit as well as light load operation. It also offers short circuit protection and over-temperature protection.The MAX16932BATIS/V+T’s integrated voltage regulator allows the power supply circuit to operate from a single input voltage, either a voltage lower than or equal to the output voltage. The regulator includes a maximum output current of 2A as well as low dropout operation. The power supply design can be implemented using a wide variety of input and output combinations.The MAX16932BATIS/V+T can be used in applications where the output voltage is critical and must be within very tight tolerances, even with input voltage variation. The MAX16932BATIS/V+T maintains tight voltage control under all temperature conditions and provides excellent line and load regulation.The MAX16932BATIS/V+T works in two different application modes, Burst Mode and Active/Quiet Mode. In Burst Mode, the switching frequency is controlled to keep the average current constant. This mode is typically used when the load current is small and the efficiency is more important. In Active/Quiet Mode, the MAX16932BATIS/V+T works in power saving mode in order to reduce switching losses for the high power applications.The MAX16932BATIS/V+T also includes a pre-charge circuit that allows the power supply to charge the backup supply voltage without the need for an external charging circuit. The pre-charge feature will automatically disable power after the main power is disconnected and then enable it again when it is reconnected. This feature provides protection for the IC in case of reversal of the main power supply.In conclusion, the MAX16932BATIS/V+T is a highly efficient DC-DC controller for automotive power applications, providing high efficiency and tight voltage control. It provides support for user adjustable parameters, pre-charge circuit, current limit and temperature protection and is suitable for use in low, medium and high power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description