Series:	Automotive, AEC-Q100
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	100mV
Data Rate:	16Mbps
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	MAX3077E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX3077EESA/V+ is an advanced, monolithically integrated, low-voltage, 1.8V real-time bus transceiver. It includes one line driver and one line receiver as an interface between a 2.5V or 3.3V system bus and a 1.8V system bus. The IC also has built-in slew rate control so that it can adjust input signals driving external capacitive loads. It is ideally suited for applications which require high speed, low voltage, low power, Slew Rate Control (SRC) and Low Voltage Logic (LVCMOS) signaling.

Application Field

The MAX3077EESA/V+ is widely used in many different applications such as digital cameras, data acquisition devices, medical instrumentation and industrial process control systems. The device is especially well-suited for applications which require a low-voltage, low-power, high-speed interface between two different logic families. The MAX3077EESA/V+ transceiver is also ideal for use in systems which employ the widely-used 2.5V/3.3V and 1.8V logic families as it provides an ideal bridge between the two levels and supports signal integrity (SI) and EMI requirements in high speed interfaces. Additionally, it allows direct interconnection of two different logic families in single-ended applications.

Working Principle

The MAX3077EESA/V+ operates by using a line driver to convert a 1.8V logic signal into a 2.5V or 3.3V logic signal and a line receiver to convert a 2.5V or 3.3V logic signal into a 1.8V logic signal. The line driver can also be configured to supply Slew Rate Control (SRC), which reduces signal emission noise in highly capacitive environments. The transceiver is also capable of driving up to 10mA of load current on the input line.The MAX3077EESA/V+ utilizes the industry standard I2C protocol and supports data rates up to 200 Mbps, making it ideal for applications which require high-speed interfacing such as digital cameras and data acquisition devices. The device also incorporates Schmitt-trigger input buffers which improve noise margins and allow for direct connections to 1.8V logic families.The MAX3077EESA/V+ transceiver is quite easy to use and requires minimal setup. It typically requires two different supply voltages, two logic levels and two ground potentials. The device also has built-in thermal shutdown and over-voltage protection which helps to ensure reliable operation in most applications.

Conclusion

The MAX3077EESA/V+ is an advanced, low-voltage, real-time bus transceiver which provides an ideal bridge between the 2.5V/3.3V and 1.8V logic families. It supports signal integrity (SI) and EMI requirements in high speed interfaces and allows for direct interconnection of two different logic families in single-ended applications. The transceiver is also very easy to use and has built-in thermal shutdown and over-voltage protection which helps to ensure reliable operation in most applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description