MAX3085CSA-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3085CSA-T is a high-speed transformer-coupledtransceiver that works with a bipolar, voltage-feedback, low-power line driver to provide data communication between devices with a CML differential signaling usage. This transceiver is ideal for applications that require an enhanced level of noise immunity, such as high-voltage or noisy environments.

The MAX3085CSA-T provides a low-resistance, transformer-coupled solution for transmitting and receiving data between two different voltages, such as between a 5V and a 1.8V device. The two channels of the device allow unidirectional or bidirectional full-duplex communication, and the improved noise protection is due to its integrated wide-band transformer design and integrated low-noise pre-amplifier.

The MAX3085CSA-T can transfer up to 1.5 Gbps of data from a 5V device to a 1.8V, with a low differential voltage of 2V. It can also operate with a minimum cascode voltage of 1.75V, ensuring compatibility with almost all bus speeds, including DDR2 and DDR3 buses. The device can also be used for bidirectional communication, allowing for a high data rate of up to 600 Mbps.

The MAX3085CSA-T also features a low-power-mode, which improves efficiency by reducing power consumption and increasing system performance. When operating in normal mode, the device can consume up to 1.7V of power, but when in low-power mode, the power consumption is reduced to 0.95V, and the power can be further reduced depending on the switching frequency.

The MAX3085CSA-T is designed to be used in a variety of applications, including serial communications, microprocessor systems, switching power supplies, and general-purpose analog and digital circuits. The device is also suitable for use in high-speed data transmission, transmission line protection, and telecom line cards. The device includes a built-in CMOS logic buffer for user-friendly interfacing, and can work with both 5V and 1.8V devices.

In terms of working principle, the MAX3085CSA-T works by transforming the incoming data signal from a 10-20 mVpp differential voltage to a 5V single-ended signal. This signal can then be used to drive the output buffer, which then transfers the signal to the bus. The device is also equipped with a feedback loop which allows for fine-tuning of the output voltage level, as well as to ensure that the signal level remains stable.

The MAX3085CSA-T is a low noise, high-speed transformer-coupled transceiver designed to provide a reliable link between systems with different power levels. It is ideal for applications that require a high level of noise immunity and improved performance. Its low-power mode and built-in logic buffer provide enhanced system performance and efficiency. The device is suitable for a wide range of applications, and can work with both 5V and 1.8V devices.

The specific data is subject to PDF, and the above content is for reference