MAX3085EESA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3085EESA+ is a serial interfacing, differential line driver and receiver that is part of a family of products for the interfacing and control of communications networks. It is used in applications such as universal asynchronous receiver/transmitter (UART) configurations, half-duplex backplane applications, and point-to-point connection links. In addition, the MAX3085EESA+ is also used for low-speed data and control applications, such as logic-level conversion, status monitoring, and voltage level translations in networking and data communications.

The MAX3085EESA+ is designed to provide fully diffential drive to the interface terminals and is capable of driving up to 192m of line. The device can accept a single-ended logic level input, or have a programmable gain that can be used when driving a differential logic input. The device can also be used as a differential line receiver, with fully differential input and output stages. The receiver can also be used as an open-loop comparator for single-ended inputs.

The MAX3085EESA+ has two operating modes: transmitter mode and receiver mode. When operating in transmitter mode, the device can drive a differential pair of outputs at up to 10Mbps, with a transmit bandwidth of up to 50MHz. It can also operate at Logic-level, up to 4Mbps. When operating in receiver mode, the device can receive signals at up to 10Mbps, with a maximum receive bandwidth of up to 120MHz, and can be operated in both single-ended and differential modes. The device has a dynamic range of up to 40dB at a frequency of 1GHz and can be configured with up to three adjustable termination resistor values.

The MAX3085EESA+ also supports several programmable features. It has an integrated internal bias circuit that can be programmed to set the voltage swing, common-mode level, common-mode impedance, and output interface. It can also be programmed to detect and filter out high-frequency spikes and parasitic common-mode signals. It has advanced error correction and signal monitoring capabilities, and can be configured for serial logging, current-mode sensing, and programmable low- voltage noise detecting.

Overall, the MAX3085EESA+ is an integrated, high-performance, low-cost line driver and receiver designed for networking and data communications applications. Its wide bandwidth, fast switching times, and its many programmable features make it a great solution for many interface and control applications. The device provides flexible signal conditioning capabilities at an attractive price, making it a good choice for many high-performance data interface applications.

The specific data is subject to PDF, and the above content is for reference