MAX3185CWP+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3185CWP+ is a part of the MAX318xx family of universal asynchronous receiver/transmitter (UART) devices. It is often used in a variety of embedded applications, such as automotive infotainment, industrial automation, medical instruments and consumer goods. The MAX3185CWP+ is designed to provide a fast, reliable and low-power UART solution. The device comprises a voltage-to-frequency (V/F) converter, a dual-mode SPI (single, two-wire or four-wire) interface, a communications port, an NRZ/NRZI encoder/decoder, and a PIN-diode protection circuit.

The MAX3185CWP+ is a sender/receiver capable of asynchronous, unidirectional, half-duplex (HDX) and full-duplex (FDX) data transfer. The device is powered from a single 3.3V supply, and features an on-chip inverter for the FIFO control input. It supports up to 16 Mbps data rate for rapid data symbol transmission and reception.

The MAX3185CWP+ is designed to provide a high-performance and low-power UART solution. It has two independent transmitters and receivers, each with a programmable baud rate range of up to 16 Mbps and individually configurable parity, data, and stop bit settings. Furthermore, the device features a wide common-mode input range of 3.3 to 5V and can operate in both half-duplex and full-duplex applications.

The MAX3185CWP+ incorporates an internal clock generator, which is driven by a time-based clock divider. This divider is used to divide the reference clock (REF_CLK) frequency to the desired bit rate. The REF_CLK is supplied by the system and can range from 1 MHz to 6.25 MHz. The MAX3185CWP+ also features an on-chip test pattern generator, which can be used to test the device while in operation.

The MAX3185CWP+ is designed to provide reliable and robust communication over a variety of physical communication mediums, such as RS232, RS485, and RS422. It is compatible with various logic levels and is flexible enough to work with devices that have an open-collector, totem-pole, or 3-state logic output. The device also features a programmable slew rate, which allows for the tuning of the data output level for improved transmission efficiency and better EMI (electromagnetic interference) performance.

In addition to its UART capabilities, the MAX3185CWP+ can also be used as a pin-diode protection circuit. This feature provides a full level of electrostatic discharge (ESD) protection, which helps to ensure the reliability of the device in a variety of harsh environment conditions. The device also features an integrated dual-mode SPI interface, which allows the user to control the device using either a single-wire or two-wire SPI interface. Finally, the MAX3185CWP+ is also capable of self-adjusting the baud rate when available reference clock frequencies vary.

In summary, the MAX3185CWP+ is a versatile UART device that is designed to provide reliable and low-power communication in a variety of embedded applications. Its wide input range, programmable slew rate, internal test pattern generator, and pin-diode protection circuit make it an ideal choice for a variety of UART applications. Its ability to self-adjust the baud rate allows it to be used in a wide variety of situations, making it the ideal solution for many UART needs.

The specific data is subject to PDF, and the above content is for reference