MAX3186EWP

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	5/3
Duplex:	Full
Receiver Hysteresis:	650mV
Data Rate:	230kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	MAX3186

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX3186EWP is a single-chip, low-voltage differential signaling (LVDS) receiver that is designed to comply with complementary LVDS (CLVDS) specifications. It supports a two-wire, point-to-point, LVDS-type interface with a clock data relationship and is often used for data transfer applications that require low-voltage, high-performance interfaces. The MAX3186EWP is used primarily in applications that require a low-voltage interface, such as video and video-over-IP, LCD displays, FPGAs, and computer-interface applications. This article will provide a comprehensive overview of the interface and working principle of the MAX3186EWP.

Interface - Drivers, Receivers, Transceivers

A typical interface consists of a driver, a receiver, and a transceiver. Drivers are the link between two devices and are commonly composed of circuits or components that supply the driving current to the signals that are transmitted between two devices. They can be either logic-level or current-controlled devices. Receivers are the receiving end of the interface and are also composed of circuits or components that sense the transmitted signals and convert them into logic signals that can be easily processed. Transceivers are combination circuits that contain both a driver and a receiver, and can be used in a variety of applications. The MAX3186EWP is a single-chip LVDS receiver, which is used in a variety of applications that require a low-voltage interface. It is composed of a driver and a receiver and is used to transfer data between two LVDS-compatible devices.

MAX3186EWP Application Field

The MAX3186EWP is used primarily in applications that require a low-voltage interface, such as video and video-over-IP, LCD displays, FPGAs, and computer-interface applications. It is ideal for applications where high-speed data transfer with low power consumption is desired, as it provides reliable performance at low power levels. The MAX3186EWP can support up to three standard data and clock pairs, as well as two low-speed data and clock pairs. The data rate of each data pair is up to 200MHz, while the rate of the low-speed data pair is up to 50MHz. The transceiver also has an integrated voltage regulator that can be used to power the system from a single supply. The MAX3186EWP is also capable of supporting Hot Swap functions, allowing it to be safely used in applications that require a hot-swap feature. With this feature, the system can be powered up without disruption, even if a device is disconnected or reconnected in the middle of a data transfer.

MAX3186EWP Working Principle

The MAX3186EWP is a single-chip, low-voltage differential signaling (LVDS) receiver that is designed to comply with complementary LVDS (CLVDS) specifications. It supports a two-wire, point-to-point, LVDS-type interface with a clock data relationship. The MAX3186EWP converts the transmitted data signals into logic signals that can be easily processed, while the integrated voltage regulator supplies the power needed by the system. The transceiver also supports a data rate of up to 200MHz, as well as Hot Swap features, allowing it to be safely used in applications that require a hot-swap feature.The data is received and converted into logic signals through the use of a differential receiver. The receivers convert the incoming LVDS signal into logic signals that can be easily processed by the system. The clock data relationship is maintained by using clock recovery circuits, which enable the transceiver to accurately receive the data signal. The transceiver then converts the data into its original form and sends it to the intended receiver.

Conclusion

The MAX3186EWP is an LVDS receiver that is used for data transfer applications that require low-voltage, high-performance interfaces. It consists of a driver and a receiver and can support up to three standard data and clock pairs, as well as two low-speed data and clock pairs. The MAX3186EWP also has an integrated voltage regulator and supports Hot Swap features, allowing it to be safely used in applications that require a hot-swap feature. The data is received and converted into logic signals through the use of a differential receiver, while the clock data relationship is maintained by clock recovery circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description