MAX3190EEUT+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Drivers, Receivers, Transceivers provide the much-needed bridge between two physical circuits, or between two logical circuits, in order to enable communication. The MAX3190EEUT+T application field and working principle are two such topics that need to be addressed and discussed in order to provide a better understanding of how this particular transceiver works.

The MAX3190EEUT+T transceiver provides the interface between two standard RS-232 communication channels. This device was designed to improve upon the traditional RS-232, which only provides single-ended voltage levels of +12 and -12V, with low power operation and noise-immunity. The MAX3190EEUT+T transceiver, on the other hand, is capable of providing higher voltage levels of up to +25/+-15V, as well as double ended signals, in order to improve noise immunity and signal integrity.

The MAX3190EEUT+T is capable of providing up to 8-bits of data resolution and data rates up to 19.2 kbps. It also integrates a number of digital and analog signal and data processing functions, such as comparators, missing edges, jitter, etc. This device can provide both standard asynchronous and half-duplex synchronous UART operation. Additionally, when connected to an external EEPROM, it can be configured to automatically switch to the half-duplex synchronous UART, thus drastically reducing the EMC susceptibility.

From a block diagram point of view, the MAX3190EEUT+T consists of two transmitters and two receivers, which share some of their functions. The transmitters, which are both half-duplex, are responsible for driving the positive voltage levels onto the communication bus, while the receivers detect and decode any incoming data. The transmitters also include a digital low-pass filter, to remove any high-frequency noise on the communication bus.

The power supply to the MAX3190EEUT+T transceiver is provided either from the digital logic or from an external power supply. A voltage supervisor unit is integrated in the design of the device, to monitor the input voltage for under and over voltage conditions, and provide protection against them.

The device includes a number of integrated support functions, such as on-chip EMI/RFI filtering, automatic gain control, and software-programmable intervals of inactivity. These features enable the device to provide high levels of noise suppression, and ensure that data is correctly transmitted and received, regardless of the surrounding environment.

At its core, the MAX3190EEUT+T transceiver is a full-duplex asynchronous communication interface. Its primary purpose is to provide a bridge between two communication links, such as serial ports, or between two digital logic circuits. The device features two softwared configurable serial communication parameters, such as baud rate and data format. Additionally, it can support both the conventional RS-232 and the more modern RS-485 communication specifications.

Overall, the MAX3190EEUT+T transceiver is a well-designed device, which offers a combination of high data rates, good noise immunity, and automatic switching to reduce EMC susceptibility. It is a great choice for providing a bridge between serial ports, or between digital logic circuits. Its on-chip features combined with its auto-configuration support make it an ideal solution for a wide range of industrial and automotive applications.

The specific data is subject to PDF, and the above content is for reference