MAX3967AEVKIT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: The MAX3967AEVKIT evaluation board is a fully integrated power-line communications (PLC) solution, designed to leverage the features of the MAX3967. The MAX3967 is a low-power, low-noise, multimode PLC signal conditioner and LED driver that is a versatile part of the evaluation board. It offers a wide range of useful applications for LED drivers, audio output, PLC signal-level conditioning, boiler control, lighting control, smart metering, consumer appliance control, and embedded system automation.

Component Description: The MAX3967AEVKIT evaluation board consists of the MAX3967, power supply and connectors, an Edison socket, and two LEDs. The MAX3967 is an integrated signal conditioner and LED driver for first-level conditional access control in PLC applications. It enables a wide variety of applications with its low-voltage operation and high-speed pulse-width-modulation (PWM) output. It can drive up to 1 A on a 3.3 V supply voltage and 2 A on a 5 V supply voltage and offers multiple modes of operation, including pulse-width modulation, pulse-height modulation, pulse-position modulation, and direct current mode, depending on the application requirement.

Operation: The board has a single three-pin Edison socket to deliver 5 V and/or 3.3 V power supply as well as to connect the RX and TX pins of the MAX3967. When the socket is Connected, power is applied to the MAX3967, and the two LEDs will turn on. The bottom edge of the board has two command jumper blocks: PWM Command, for setting up the required PWM commands, and LED Enable Command, for controlling the LEDs. Depending on the type of application, different sets of PWM commands can be sent to the board to send the required signal to the MAX3967. The LED enable command is used to turn the LEDs ON/OFF depending on the environmental light conditions.

LED Driver: The MAX3967AEVKIT can be applied as an LED driver, enabling application areas such as LED lighting control, automotive LED lighting, LED backlighting, LED dimming, etc. The LED connected to the evaluation board can be controlled through PWM commands sent to the board. The LED\'s brightness can be regulated by modifying the duty cycle of the PWM signal, and its color can be adjusted through the use of separate channels for red, green, and blue colors.

PLC Signal Conditioner: The MAX3967AEVKIT has wide applications in PLC signal conditioning. The MAX3967 operates with input voltages up to 400 V peak AC, with low-power operation and low noise operation. It is designed to minimize harmonics to meet various standards such as EN50160. The PLC signal can be tuned through a hardware interface by controlling the PWM command of the board. It is also capable of high-speed pulse-width-modulation (PWM) output of up to 50 MHz.

Conclusion: The MAX3967AEVKIT evaluation board is a highly integrated power-line communications (PLC) solution designed to leverage the features of the MAX3967. It is suitable for use in LED driver applications, audio output, PLC signal-level conditioning, boiler control, lighting control, smart metering, consumer appliance control, and embedded system automation. It combines low power consumption, low noise operation and high-speed pulse-width-modulation with a unique and versatile set of features. By using this versatile evaluation board, designers can save time and cost when designing their PLC, LED driver and audio output applications.

The specific data is subject to PDF, and the above content is for reference