MAX3232EIPWRQ1

Series:	Automotive, AEC-Q100
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	300mV
Data Rate:	250kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	16-TSSOP
Base Part Number:	MAX3232

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

INTRODUCTIONThe MAX3232EIPWRQ1 is an advanced monolithic level-shifting integrated circuit from Maxim Integrated that converts low-voltage (<3.6V) asynchronous serial data to a standard RS-232 voltage level known as an interface driver, receiver, and transceiver. This IC is designed to provide highly efficient and reliable serial data communications between LSIs operating at different voltage levels while consuming very low power. With its high performance level, the MAX3232EIPWRQ1 offers a cost-effective solution to data transmission between low-power and high performance application scenarios.APPLICATION FIELDThe MAX3232EIPWRQ1 is an interface driver, receiver, and transceiver intended primarily for battery-powered systems where long cable length is desired. This product offers several key advantages that make it particularly well-suited for a variety of applications. Due to its low operating voltage, it is well-suited for powering from a single 3V battery, allowing for design flexibility in a variety of battery powered applications. The MAX3232EIPWRQ1 also provides a host of protection features such as ESD protection that conforms to IEC-61000-4-2 and surge protection in excess of 4000pF. It is also an ideal solution for remote data transmission over low-noise and low-voltage systems.In addition to these features, the MAX3232EIPWRQ1 is optimized for low power consumption, using only 150 µA of quiescent current when idle, while the RX and TX pins are active. It also has a low standby current that is less than 1nA. In addition, the slew rate of the output drivers is optimized for low power, allowing it to remain in a low power state even when transmitting data at full speed.The MAX3232EIPWRQ1 has been used in a variety of applications, including automotive data communication, medical instruments, point-of-sale terminal, portable instrumentation, factory automation, and embedded systems.WORKING PRINCIPLEThe MAX3232EIPWRQ1 is an interface driver, receiver, and transceiver that uses an integrated level shifter between an asynchronous serial data source and a standard RS-232 level device. This IC is used to convert between low voltage (<3.6V) asynchronous serial data to a RS-232 logic level, from -10V to +10V, which is optimized for low-power consumption. The IC operates in a low power state when the driver pins (TX and RX) are inactive, and consumes very little power (<150µA) when active. The RX/TX pins can support data rates up to 200 Kbps and are designed to operate with a wide supply voltage range, from 3V to 5.5V. The IC also provides slew rate control on the output pins, allowing it to remain in a low power state even when the data transmission rate is fast. This aspect of the MAX3232EIPWRQ1 ensures better stability in the data transmission cycles. The single-ended output drivers offer standard ESD protection, with a threshold of 2kV, as well as surge protection as specified in IEC-61000-4-2. The IC has onboard surge protection diode and ESD protection for the enable, TXD, and RTS pins. Overvoltage, overcurrent, and thermal protection are also available. The MAX3232EIPWRQ1 features a short-circuit and thermal shutdown protection mechanism, allowing the IC to be safely used in a variety of data transmission applications.CONCLUSIONThe MAX3232EIPWRQ1 is a high-performance monolithic level-shifting integrated circuit designed to convert low voltage (<3.6V) asynchronous serial data to a standard RS-232 level. It is an ideal solution for cost-effective and efficient remote data transmission over low-noise and low-voltage systems, providing various features such as low power consumption, surge and ESD protection, and slew rate control. Its array of features make it a suitable choice for a variety of applications, such as automotive data communication, medical instruments, point of sale terminals, portable instrumentation, factory automation, and embedded systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description