MAX3232IDBR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3232IDBR is a Triple RS-232 Line Driver/Receiver Transceivers designed to operate from a single 3.0V to 5.5V supply with a minimum current draw of only 500μA. The transceiver features three receivers, three drivers and a shutdown mode, allowing it to be used as a low power replacement for higher power dual and quad rail-to-rail transceivers. The MAX3232IDBR is suitable for use in applications such as personal computing, embedded control, and industrial automation.

The MAX3232IDBR is ideal for applications that require high transmission speeds and low power consumption, such as those found in personal computing, embedded control, and industrial automation. The device operates at data rates up to 100 kbps and is capable of driving up to 15 meters of unshielded twisted pair cable. The device also has a low current draw of only 500 μA (typical), making it suitable for battery-powered applications.

The MAX3232IDBR operates from a single supply voltage of 3.0V to 5.5V. It features input and output stages that can operate with supplies much lower than the main supply voltage, allowing it to be used in applications where the power supply varies. This allows the device to operate at data rates up to 100 kbps, with an output voltage swing of ±2V.

The MAX3232IDBR has three receivers and three drivers, allowing the device to operate in both an asynchronous and a synchronous data-transmission environment. The device also has a shutdown mode, which reduces the power consumption to less than 1 μA. The device has 500 ppm/°C of offset drift, loopback capability, overrun error flag and a basic transmitter enable pin. The device also includes an additional input shutdown feature, allowing it to be used in applications where low power is required.

The MAX3232IDBR also features a receive data detect circuit which can distinguish between good and bad data. If a packet arrives at the receiver, the circuit outputs a status flag which indicates whether or not the received data is correct. This allows the device to be used in applications where data integrity is of critical importance.

The MAX3232IDBR also features a driver enable (DE) input. This input is used to enable the driver, allowing data to be transmitted. The DE input also has a slew rate limit feature, which prevents system noise from causing false data to be transmitted. The slew rate limit feature limits the transition time of the driver\'s output voltage to prevent any false data from being transmitted, while still allowing full data bandwidths to be achieved.

The MAX3232IDBR is an ideal solution for applications that require a high performance, low power and low cost RS-232 line driver/receiver transceiver. The device is capable of driving up to 15 meters of cable and is capable of operating at data rates up to 100 kbps. The device\'s low power and low cost make it ideal for use in battery-powered applications, such as personal computing, embedded control, and industrial automation.

The specific data is subject to PDF, and the above content is for reference