MAX3237EIDWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3237EIDWRG4 is an advanced, ultra-low voltage, true ±15kV ESD protected, 3.0V to 5.5V powered, low-power transceiver for RS-232 and half-duplex RS-422/RS-485 communications. This 3-in-1 device includes integrated drivers, receivers, and transceivers that offer seamless integration with less board space. Additionally, it supports full-duplex communication with single-ended and differential signaling. The device is optimized to support lower voltage in applications where a 3.0V power supply is available. Low voltage operation makes the device very well suited for battery powered applications or applications with a limited power supply.

The MAX3267EIDWRG4s extremely low power consumption (±80µA/channel) makes it ideal for portable and battery-powered systems, while its extremely fast turn-off time (20µs) makes it very suitable for data-acquisition systems. Its internal power-down-detection signal (EN) monitors the device\'s power supply and can be used to shut down the device in case of an unexpected supply voltage failure and save battery life. The answer to detecting device failures is the internal Fail-Safe feature, ensuring that the device stays in the safe state if a short-circuit or open-circuit failure of the transmitter is detected.

The device supports up to 12.5 Mbps of data rate and has low EMI emission characteristics. This is achieved by a built-in differential signal modulator that reduces EMI emission caused by common-mode noise. It also contains high-gain, low-loss receivers that can be used to extend the reach of the serial bus. To ensure the system is running properly, the receiver automatically checks for noise, signaling errors and abnormal levels, while the internal transmitter monitors the receiver state, and adjusts data format according to an internal RX_DATA signal.

The MAX3267EIDWRG4 includes five integrated inputs, three outputs, and four bidirectional lines, which are configured on a single chip. These components are capable of transmitting and receiving data at speeds up to 12.5 Mbps. The input lines are: TXIN, RXIN, SEL, RTS, and CTS. The output lines are: TXOUT, RXOUT, RX_DATA, and Tx_Enable. The bidirectional lines are: TxD, RxD, TX_enable, and RTS_enable.

The MAX3267EIDWRG4 is the ideal choice for applications requiring a low-voltage and low-power device. Its integrated drivers, receivers and transceivers offer a cost-effective and space-saving solution for a variety of RS-232 and half-duplex RS-422/RS-485 communications applications. Easy-to-use control and monitoring features make this device an attractive solution for portable, battery-powered and data-acquisition systems.

The specific data is subject to PDF, and the above content is for reference