MAX3467CSA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3467CSA+ is a multifunction single-channel transceiver that combines the functionality of a data line driver, receiver, and 3-state buffer. It is frequently used in the RS-232 and RS-485 communications protocols. The main applications of the MAX3467CSA+ are in the field of data bus communication networks, such as communications between computers, controllers, printers, modems, etc.

The MAX3467CSA+ consists of a differential line transceiver, a transmitter and receiver, a logic level translator, an auto-flow-control circuit, a slew rate-controlled output, and a 3-state buffer. The transceiver is opened and closed using a logic level input signal. The receiver has two outputs – a logic-level output and an open collector output. The transmitter has re-swing characteristics, allowing the MAX3467CSA+ to achieve the data rate of the standard RS-232 and RS-485 protocols. The 3-state buffer enables the unit to cause electrical isolation between different nodes in the communication network.

The MAX3467CSA+ operates at a maximum data rate of 1.2 Mbps and is designed to provide optimal electrical performance in noisy and harsh industrial environments. It uses a low-powerenable (LPE) input to reduce power consumption when the device is not actively transmitting or receiving data. To reduce system cost and board space, the MAX3467CSA+ includes a separate single-ended input supply pin and a separate single-ended output supply pin, both of which are provided by the same voltage source.

The MAX3467CSA+ has three main modes of operation. In the standby mode, the transceiver is disabled and the input pins and receiver outputs are in the high-impedance state. In auto-flow-control mode, data signaling is enabled, the transmit output is kept low while the current is disabled, and the receiver outputs are providing logic-level indications of incoming data. In the receiver mode, the transmitter is disabled and the receiver outputs are enabled.

The MAX3467CSA+ also includes a slew rate-controlled output on the transmitter side. This output is used to reduce the power supply noise present on noisy data buses, ensuring the integrity of data transmission. In addition, the MAX3467CSA+ includes an integrated logic level translator to ensure compatibility with different logic families, such as CMOS and TTL, to eliminate the need for an additional interface logic.

The MAX3467CSA+ offers a wide range of features and benefits to its users. Its high data rate, low power consumption, and small form factor make it an ideal solution for a variety of data communications applications. Its integrated logic level translator, auto-flow-control circuit, and slew rate-controlled output enable the device to provide robust and reliable communication links at high data rates. Finally, its compact form factor enables the MAX3467CSA+ to be easily integrated into existing systems without the need for bulky external components.

The specific data is subject to PDF, and the above content is for reference