MAX3483CSA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX3483CSA+ is an integrated serial differential bus transceiver designed specifically for applications where bidirectional signaling is required. Developed by Maxim Integrated, this device features low power consumption, a wide operating voltage range, high data rates, and is capable of performing both 1-wire and 3-wire operations.

The device includes a differential receiver and differential transmitter, as well as packer, logic and other components. The device is capable of running on as little as 0.75 volts, up to a maximum of 5 volts, at data rates up to 1M bps. It is packaged in a small 8-pin, SOP package. The MAX3483CSA+ is therefore suitable for applications such as USB, HDMI, and FireWire.

Applications

The MAX3483CSA+ is designed specifically for serial interface applications where a differential bus transceiver is needed. Common applications include:

• USB applications
• I2C/SPI applications
• Ethernet
• Serial ATA
• UHF wirelesss communications (for example, Bluetooth and WLAN)

The device is also well suited to automobile-related applications, such as a vehicle\'s CAN bus. Being a low power device, it is ideal for portable devices, such as mobile phones and tablets.

Working Principle

The MAX3483CSA+ transceiver includes a differential receiver and a differential transmitter, and works on three-wire and four-wire systems. The receiver is able to read the data sent from the transmitter. It does this by detecting the voltage differential (the difference in voltage between the two data lines going to the receiver) and compares this to a reference voltage. If the detected voltage is greater than or equal to the reference voltage, then a logic high is sent to the receiver, indicating a logical one, while a logic low is sent if the detected voltage is less than the reference voltage, indicating a logical zero.

The transceiver\'s transmitter sends the data received by the receiver back out on the same two lines. To do this, a voltage differential is generated across the two lines. This detected voltage is then read by the receiver, and the cycle repeats.The transmitter is able to provide data in either 1-wire or 3-wire mode. In the 1-wire mode, the transmitted data is stored in a shift register, and then sent out on a single wire. In the 3-wire mode, three wires are used to receive, transmit, and accept the data.

Conclusion

The MAX3483CSA+ is a low-power transceiver developed by Maxim Integrated for bidirectional differential signaling. The device is well suited to a wide array of applications, from USB and I2C-SPI to Ethernet and vehicle CAN buses. The device includes both a receiver and a transmitter, and is capable of running on as little as 0.75 volts, up to a maximum of 5 volts, at data rates up to 1M bps. With its small size and low power consumption, the MAX3483CSA+ is ideal for portable devices.

The specific data is subject to PDF, and the above content is for reference