MAX706RCSA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Integrated circuits are ubiquitous in today\'s technology, as they are used in almost all electronic devices. Supervisors, also known as Power Management ICs (PMIC), are integrated circuits that monitor and control the flow of power throughout a system. The MAX706RCSA+T is one such PMIC that provides reliable system reset and monitoring circuitry for embedded applications. This article will discuss the application field and working principle of the MAX706RCSA+T.The MAX706RCSA+T is a low-cost, low-power supervisor specifically designed for microcontroller and microprocessor applications. It is used to monitor the system power supply and maintain system integrity, while providing a reset signal to the system if the power supply becomes unstable. It is also used to monitor the power supply sequencing and maintain it during power cycling.The MAX706RCSA+T features an adjustable reset threshold of 2.2V to 6V and an adjustable reset time delay of 10ms to 10s. The reset output is active low for both manual and power-on reset applications. It also features an adjustable Watchdog Timer to detect system failure and trigger a reset signal to maintain system reliability. The Watchdog Timer can be disabled by applying a logic low to its Enable input. The Reset output has an open drain configuration, allowing multiple chips to be connected in parallel, with multiple reset signals connected to the same node.In addition, the MAX706RCSA+T provides an active low reset output to the system when an out-of-range voltage is detected by its internal comparator. This comparator can monitor the power supply, battery voltage or any other voltage up to 6V. The comparator can be disabled by applying a logic low to its Disable input.The MAX706RCSA+T also features an adjustable Watchdog Timer, which can be used to detect system performance degradation and system hangs. The Watchdog Timer can be disabled by applying a logic low to its Enable input. Its Clear output is an active low output that can be used to clear out-of-range conditions, and its Status output is an active high output to indicate power supply stability.Overall, the MAX706RCSA+T is a low-cost, low-power supervisor specifically designed for microcontroller and microprocessor applications. It provides reliable system reset and monitoring circuitry for embedded applications, while maintaining system integrity and preventing system hangs. Its adjustable reset threshold, reset time delay and Watchdog Timer enable it to monitor the system power supply and detect out-of-range conditions. Its Reset, Clear and Status outputs enable it to maintain system reliability and reset the system when necessary.

The specific data is subject to PDF, and the above content is for reference