MBR150G

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	50V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	750mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	500µA @ 50V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	Axial
Operating Temperature - Junction:	-65°C ~ 150°C
Base Part Number:	MBR150

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBR150G Application Field and Working PrincipleThe advent of modern day technology and the increasing availability of components have led to the use of rectifiers in a variety of applications. The MBR150G diode-rectifier is one such component that has the ability to provide efficient power conversion and transmission, as well as good safety and reliability in many types of power systems. Specifically, the MBR150G is a single phase UltraFast recovery rectifier bridge module. It is a single-way power controlling device and is suitable for use in AC-DC rectification, power factor correction (PFC) circuitry, and other types of power supply systems. The device can handle 150A peak pulse current, allowing it to be applied to high power, medium frequency rectification. This type of diode-rectifier can work efficiently in applications such as uninterruptible power supplies (UPS), AC/DC converters and power supplies, power rectifiers and bridges, solar energy systems, monitoring systems, off-line converters, DC loads, and more. Additionally, the device can handle higher voltage and power applications where other rectifiers can\'t. The MBR150G is composed of fifteen diodes connected in three branches, the top, middle and bottom. There are two rectifiers in each of these branches. The top and bottom branches are connected to a single node at the potential difference of V1 and V2 respectively. The middle branch has two sets of rectifiers connected to the two nodes V1 and V2 at two different potentials. The working principle of the MBR150G is based on its unique integrated ultrafast recovery diode technology. This diode has the ability to recover a large part of the reverse voltage drop during rectification, allowing the device to handle higher currents. When the bridge rectifier module is connected to an AC mains supply, the two rectifiers in the top and bottom branches are forced to conduct current in alternate half cycles, while the pairs in the middle branch pass current during the positive half cycle only. This causes the diodes to alternately forward bias and reverse bias during each half cycle of the alternating current, turning the AC current into a pulsating DC waveform. This waveform is usually smoothed out by a filter network to get the desired steady DC waveform. The MBR150G diode-rectifier is an effective and efficient device that can be used in a wide range of applications such as uninterruptible power supplies (UPS), AC/DC converters and power supplies, power rectifiers and bridges, solar energy systems, monitoring systems, off-line converters, DC loads and more. It is a robust device that is reliable and safe to use, with excellent power conversion and transmission capabilities.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description