MBRF10H100/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MBRF10H100/45 is a single diode rectifier chip, which is most commonly used in applications related to power supplies, such as AC to DC conversion, on/off switching and voltage regulation. The device consists of a single diode junction with a current rating of 10A and a forward voltage drop of 1.0V. The device has a clamping voltage of 45V and a forward recovery time of 90ns. The chip is available in a variety of package options, including TO-220, TO-247, and TO-263.

The MBRF10H100/45 is primarily used to regulate the flow of electricity through a circuit, by allowing the current to flow in only one direction. The diode acts as an electrical one-way valve, by only allowing current to pass in the forward direction, while blocking the current in the reverse direction. This type of diode is particularly useful in power supply circuits, as it prevents the voltage across the load from exceeding the prescribed limits. In addition, the device is also used to suppress high frequency noise and minimize the damage caused by inductive load switching.

The working principle behind the MBRF10H100/45 is relatively simple. When the diode is forward biased, the electric current flows easily through the P-N junction and into the external circuit. However, when the diode is reverse biased, the electric current is blocked from passing through the P-N junction and into the external circuit. This is achieved by the voltage difference between the anode and the cathode, which is dependent upon the voltage value of the external circuit.

In order to effectively use the MBRF10H100/45, it is important to select the appropriate operating limit values for the device. The maximum forward voltage drop should be no higher than 1V, and the maximum junction temperature should not exceed 150°C. The device should be heated to the maximum operating temperature prior to operation and maintained at that temperature for the duration of its operation. Additionally, the peak reverse voltage applied to the device should not exceed 45V. It is also important to ensure that the device is not over-stressed, as this could lead to permanent damage and circuit malfunctioning.

The MBRF10H100/45 single diode rectifier chip is a useful device for a variety of applications related to power supply circuits. Whether used for AC to DC conversion, on/off switching or voltage regulation, the diode is capable of providing dependable and reliable operation in most situations. In order to ensure optimal performance of the device, the user must adhere to the maximum operating parameters of the device, and take appropriate measures to protect the diode from overstressing.

The specific data is subject to PDF, and the above content is for reference