MBRM2H100T3G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single is a type of diode that converts an alternating current, or AC, into a direct current, or DC. By connecting two terminals to an AC voltage source and then clamping the voltage to a zero voltage state, the diodes can convert electrical power from AC current to DC current. The MBRM2H100T3G is a single rectifier diode manufactured by Taiwan Semiconductor that is often used for this purpose.

The MBRM2H100T3G is designed to operate over a wide temperature range of -25 to +175, a low forward voltage of 0.45V, and a high forward current of 3A. This makes it suitable for a variety of applications, including motor control, battery charging, and switch mode power supplies. Additionally, it has a breakdown voltage of 100V, which makes it suitable for powering low voltage devices.

The working principle of the MBRM2H100T3G is simple. The two terminals are connected in parallel, with one side connected to the AC voltage source. The other side is then connected to ground, or a reference voltage that is below the peak amplitude of the AC wave. When the waveform passes through this point, the diode conducts current, allowing electricity to flow in the forward direction.

When the waveform passes through the other side, or the reverse bias phase, the diode blocks current from flowing in the reverse direction. This allows the voltage to build up until it reaches the breakdown voltage of the MBRM2H100T3G, at which point the diode begins to conduct current again. This cycle is repeated for each wave, resulting in a direct current that is consistent in voltage and amplitude.

The MBRM2H100T3G is a single rectifier diode that is designed to handle wide temperature ranges, low forward voltage, and high forward current. It is suitable for a variety of applications such as motor control, battery charging, and switch mode power supplies. Its working principle is based on the concept of forward and reverse-biased conduction, allowing it to convert AC power to DC power effectively.

The specific data is subject to PDF, and the above content is for reference