MC74HC4053AD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers

The MC74HC4053AD is a device that brings together combination of analog switches and MOS multiplexers. Utilizing this technology, the device is able to perform a wide variety of functions, including multiplexing, demultiplexing, and analog switch routing. The applications of this device can be seen in several fields, ranging from medical devices and audio equipment to function generators and power converters.

Device Structure

The structure of the device can be divided into two portions — the common bus portion and the select bus portion. The common bus portion is made up of the common band (CM), which is a continuous conductor, and it is connected to the three separate wiring lines. The first line connects to the VCC (positive voltage terminal), the second line connects to the VEE (ground voltage terminal), and the third line is connected to the two select busses, S0 and S1. The common bus portion also contains the Break Band (BD) which is used when the device is selected.

The second portion, the select bus portion, is made up of the two select busses, S0 and S1, along with their respective select lines (S0L and S1L). The S0 and S1 busses have both an active and inactive state. When the select lines are in an active state (high voltage or logic high), the corresponding select bus is enabled and the analog output from the selected device is disconnected. When the select lines are in an inactive state (low voltage or logic low), the corresponding select bus is disabled and the analog output from the selected device is connected.

Working Principle

The MC74HC4053AD operates in two different modes — multiplexer/demultiplexer mode and switch mode. In multiplexer/demultiplexer mode, two analog signals (A and B) are input to the device. The outer two select lines, S0 and S1, are toggled between high and low voltage states, resulting in one of the four possible outputs, depending on the logic level of the select lines.

In switch mode, the two input signals (A and B) are connected to the common band (CM). The inner two select lines, S0L and S1L, are then toggled between high and low voltage states, resulting in either the A signal or the B signal being output to the Break Band (BD).

Application Fields

The MC74HC4053AD has various applications across several industries. In medical devices, the device is used to route signals from one device to another, such as from a stethoscope to an oscilloscope. In audio equipment, it is used to route audio signals from one output device to another, such as internal and external speakers. In power converters, it is used to route power supplies from one output device to another, such as a voltage regulator to a power supply.

The device also has applications in function generators, where it is used to route signals from an oscilloscope to a waveform generator. In robotics, the device is used to route power signals from one motor to another, such as a servo motor to a DC motor. Finally, in communication systems, the device is used to route signals from one receiver to another, such as a radio receiver to a mobile phone.

Conclusion

The MC74HC4053AD is an analog switch device with multiplexer/demultiplexer and switch operating modes. It is used in a variety of applications, from medical devices and audio equipment to function generators and power converters. With its ability to switch between signals and routes with minimal energy, this device is a cost-effective and efficient solution for many applications.

The specific data is subject to PDF, and the above content is for reference