MCP1404-E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP1404-E/P device is a Power Management Integrated Circuit (PMIC) device that specifically falls under the category of Gate Drivers. This particular device is a convenient and low cost solution for integrated protection and drive functions in many applications that require extra power control, thus making it a reliable and accessible choice.

This PMIC device is a Field Effect Transistor (FET) driver IC which provides full bridge control and protection. It is especially useful in applications that require both high voltage and high current control, such as air conditioners, fans, motors, and power supplies. This IC operates in the single supply range of 3 to 18 V, and provides LED fault diagnosis.

The MCP1404-E/P device comes as an E-pack package, as a 7-pin integrated circuit chip. This chip uses a MOSFET driver to acquire a high efficiency gate control solution, in order to minimize gate capacitance and gate current dissipation. It is equipped with the necessary input protection, output protection, and current-limiting for a safe operation. The device also provides little to no wiring, as the five logic channels are fully independent and isolated from each other.

The working principle behind the MCP1404-E/P device is power delivery with a single MOSFET, in order to control current flow for two directions – high side and low side. It is designed for low power use and high-side current monitoring. Its main function is dual full-bridge gate driver, which works by turning the MOSFETs on, turning them off (as a control circuit), and monitoring and controlling the current flow. The high-side current monitoring is done by measuring the voltage across a sense resistor on the high side MOSFET while simultaneously monitoring and controlling the voltage on the low side MOSFET.

The MCP1404-E/P device also has several protection features. It is equipped with over-voltage protection, which is enabled when the voltage on the low side MOSFET is higher than the threshold voltage. This protection function keeps the device from increasing the voltage further and turns the MOSFET off. The device can be set to detect the current over-load on the high side and set the over-load protection accordingly. An open-drain fault pin is also incorporated in the design, which is disconnected from the input/control logic and goes low when the device is in an over-temperature or over-current condition.

The MCP1404-E/P device provides a reliable and convenient solution for applications that require extra power control. Its design delivers power with a single MOSFET and controls current flow for two directions – high side and low side. Its built-in protection features make it a safe and reliable choice. This PMIC - Machined IC device, with its many features, is sure to be a great choice for meeting individual application needs.

The specific data is subject to PDF, and the above content is for reference