MCP3551T-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP3551T-E/MS is a data acquisition device that falls into the analog to digital converters category. The device is used to analyze and measure a wide variety of analog signals, convert them into digital signals, and display the results in various formats. The MCP3551T-E/MS utilizes the Sigma Delta Analog-to-Digital Converter (Σ-Δ ADC) architecture to accurately measure and convert analog signals. This type of ADC architecture is preferred over other conversion methods due to its high resolution and fast transfer rates.The MCP3551T-E/MS is designed to be used in applications such as automotive, industrial, medical, and consumer. It is capable of measuring single-channel analog signals from -10V to +10V with a 16-bit resolution. The device can operate at a maximum sample rate of 2.4MS/s and a conversion rate of 1MS/s. The device has an input frequency response of 40Hz to 20kHz, making it ideal for use in noise sensitive systems. Its signal-to-noise ratio is also impressive, at around 80dB.The MCP3551T-E/MS has an onboard digital signal controller that is responsible for automatically calibrating the device and managing the conversion process. The signal controller also features a signal conditioning circuit that provides additional noise attenuation and signal amplification. This signal conditioning circuit allows the device to maintain its excellent performance even when measuring weak or noisy signals.In addition to its excellent noise rejection and signal conditioning features, the MCP3551T-E/MS also features onboard safety and protection features. These features include power-on reset, voltage overload protection, input monitoring, and a temperature protection circuit. The device is protected against ESD up to 8kV as well as other overvoltage and overcurrent events.To use the MCP3551T-E/MS, an analog signal is input into the device and then amplified and filtered. The signal is then passed to the Sigma-Delta ADC, which converts the signal into digital format. The conversion process produces 16-bit digital values, which are then transmitted to an external device for display and analysis.The MCP3551T-E/MS is an excellent choice for applications where high speed, high resolution, and low-noise are critical. The device\'s low power consumption and wide range of safety and protection features make it an ideal choice for battery-powered devices. The device is also suitable for use in high-temperature environments, making it an excellent choice for automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference