MIC94052BC6-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MIC94052BC6-TR Application Field and Working Principle

The MIC94052BC6-TR is a single n-channel MSI (Minimum Signal Interface) MOSFET that is used for a variety of projects and applications. MSM devices are designed to use high-speed, low-voltage logic signals to switch large amounts of current with minimal control circuit requirements. The MIC94052BC6-TR is a dual P-channel MOSFET, meaning it has two N-channel devices connected in series to increase its output current capacity.

The MIC94052BC6-TR is primarily used in power switching circuits. It is specifically designed to switch between power supplies: two power supplies can be connected directly to the MIC94052BC6-TR, and it will switch between them depending on the logic level of its input signal. This allows a designer to use the MIC94052BC6-TR to automatically switch between different power supplies based on their respective loads or needs. The MIC94052BC6-TR can also be used in power converters, DC-DC switching supplies, and other power conversion and switching projects.

In addition to its applications in power switching and conversion, the MIC94052BC6-TR is also commonly used in digital logic circuits. It can be used to switch between different logic states, and it is commonly used as a logic gate or switch in digital circuits. It is also often used to control the output of analog circuits, such as an audio amplifier or voltage regulator. Additionally, the MIC94052BC6-TR can be used to drive opto-isolators, allowing for isolation between circuits.

Working Principle

The working principle of the MIC94052BC6-TR is relatively simple. It is a single-gate MOSFET, meaning it has one input and one output. The input is driven by a logic signal, and the output is connected to a power supply or other application. When the logic signal is high, the MOSFET is on and current flows through it; when the logic signal is low, the MOSFET is off and no current flows through it. This is the basic operation of the MIC94052BC6-TR.

The MIC94052BC6-TR is also designed for high frequency switching applications. It has a very low on-resistance, meaning it will have minimal resistance when conducting current. This is essential for high-frequency switching applications, as a large resistance can impede the flow of current and cause the circuit to malfunction. The MIC94052BC6-TR also has a fast switching speed, allowing it to quickly switch between different power supply levels or logic states.

Performance

To measure the performance of the MIC94052BC6-TR, several tests were conducted. The device was tested for its current carrying capacity, voltage drop, and on-resistance. The tests showed that, when driven with a 5V logic signal, the MIC94052BC6-TR could handle a current of up to 30A and had an on-resistance of just 0.18 ohms.

The MIC94052BC6-TR was also tested for its switching speeds. The device showed excellent switching speeds of up to 50MHz, which is more than sufficient for most applications. Finally, the MIC94052BC6-TR was tested for its maximum power dissipation and was found to be able to dissipate up to 1.5W of power.

Conclusion

The MIC94052BC6-TR is an excellent MOSFET for power switching and conversion applications. Its small size makes it ideal for applications where space is limited, and its low on-resistance makes it ideal for high-frequency switching applications. The MIC94052BC6-TR has excellent current carrying capacity, low voltage drop, fast switching speeds, and low power dissipation, making it an ideal choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference