MK60FN1M0VLQ12

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

Features

    1. Operating Characteristics

        – Voltage range: 1.71 to 3.6 V

        – Flash write voltage range: 1.71 to 3.6 V

        – Temperature range (ambient): -40 to 105°C

    2. Performance

        – Up to 120 MHz Arm® Cortex®-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

    3. Memories and memory interfaces

        – Up to 1024 KB program flash memory on nonFlexMemory devices

        – Up to 512 KB program flash memory on FlexMemory devices

        – Up to 512 KB FlexNVM on FlexMemory devices

        – 16 KB FlexRAM on FlexMemory devices

        – Up to 128 KB RAM

        – Serial programming interface (EzPort)

        – FlexBus external bus interface

        – NAND flash controller interface

    4. Clocks

        – 3 to 32 MHz crystal oscillator

        – 32 kHz crystal oscillator

        – Multi-purpose clock generator

    5. System peripherals

        – Multiple low-power modes to provide power optimization based on application requirements

        – Memory protection unit with multi-master protection

        – 32-channel DMA controller, supporting up to 128 request sources

        – External watchdog monitor

        – Software watchdog

        – Low-leakage wakeup unit

    6. Security and integrity modules

        – Hardware CRC module to support fast cyclic redundancy checks

        – Hardware random-number generator

        – Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms

        – 128-bit unique identification (ID) number per chip

    7. Human-machine interface

        – Low-power hardware touch sensor interface (TSI)

        – General-purpose input/output

    8. Analog modules

        – Four 16-bit SAR ADCs

        – Programmable gain amplifier (PGA) (up to x64) integrated into each ADC

        – Two 12-bit DACs

        – Four analog comparators (CMP) containing a 6-bit DAC and programmable reference input

        – Voltage reference

    9. Timers

        – Programmable delay block

        – Two 8-channel motor control/general purpose/PWM timers

        – Two 2-channel quadrature decoder/general purpose timers

        – IEEE 1588 timers

        – Periodic interrupt timers

        – 16-bit low-power timer

        – Carrier modulator transmitter

        – Real-time clock

  10. Communication interfaces

        – Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability

        – USB high-/full-/low-speed On-the-Go controller with ULPI interface

        – USB full-/low-speed On-the-Go controller with on-chip transceiver

        – USB Device Charger detect (USBDCD)

        – Two Controller Area Network (CAN) modules

        – Three SPI modules

        – Two I2C modules

        – Six UART modules

        – Secure Digital Host Controller (SDHC)

        – Two I2S modules