MKL13Z64VLH4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MKL13Z64VLH4 belongs to the Arm Cortex M0+ embedded microcontrollers family. The MKL13Z64VLH4 is a low-power microcontroller with an integrated CAN peripheral, which offers a higher level of integration than traditional microcontrollers. It has a relatively large number of integrated peripherals, including analog-to-digital converters (ADCs), pulse width modulation (PWM) units, and a variety of serial communication protocols. The MKL13Z64VLH4 also features low power consumption, ease of programming, and a wide variety of features and capabilities.

The core of the MKL13Z64VLH4 is based on one of Arm\'s Cortex-M0+ microcontroller cores, which offers superior performance, low power consumption and low static power consumption. The Cortex-M0+ processor core operates at up to 48 MHz and offers programmable interrupt priorities, a nested vectored interrupt controller (NVIC) and a nested vectored interrupt controller (NVID). The integrated NVIC co-processor provides hardware support for interrupt latency, context switching and interrupt reactivation. It also features an integrated power-on-reset (POR) and a watchdog timer (WDT) which can be used to detect system errors.

The MKL13Z64VLH4 offers a wide selection of on-chip peripherals, including two 16-bit timer/counters (TCCs), five UARTs, two I2C buses, three SPI buses, two CAN buses, one USB port and a variety of general purpose Input/Output (GPIO) pins. The on-chip CAN controller supports CAN 2.0A and CAN 2.0B protocol. The USB port offers full-speed device and host mode with integrated DMA and packet handler. The integrated DMA controller supports up to 32 DMA channels and provides high throughput with minimal latency.

The MKL13Z64VLH4 is ideal for applications that require low power consumption, real-time processing and robust programming. It is suitable for a wide range of embedded applications, such as in industrial systems, automotive systems, home automation, consumer and home appliances, building automation, health and fitness monitoring. It is also suitable for applications involving digital signal processing, such as audio and video streaming, encryption and decryption and other sensor-based applications.

The MKL13Z64VLH4 works on the principle of power-driven, low-power microcontroller architecture. The power supply pins, reset pins and test pins are used to control the microcontroller. The system power can be switched on, off and put in reset using the power and reset pins. The processor core can be powered up using the on-chip regulator, and the software can be downloaded and executed using the test pins. The system can be put in reset using the reset pin. The on-chip debug register enables full access to the internal registers of the microcontroller.

The MKL13Z64VLH4 is usually programmed using C programming language. The analog-to-digital converters (ADCs) support a wide range of voltage levels and enable the microcontroller to measure analog signals such as temperature and pressure. The on-chip PWM unit can generate various waveforms and frequencies, which can be used to control motors, servos and other external devices. The on-chip serial communications, such as UART, SPI and I2C, enable the microcontroller to communicate with external devices.

In summary, the MKL13Z64VLH4 is a low-power microcontroller with an integrated CAN peripheral. It offers the highest level of integration and a wide variety of features and capabilities. It is an ideal choice for applications that require low power consumption, real-time processing and robust programming. The on-chip peripherals, such as ADCs and PWM units, enable the microcontroller to measure analog signals and generate waveforms and frequencies, as well as communicate with external devices.

The specific data is subject to PDF, and the above content is for reference