MKL15Z32VLH4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MKL15Z32VLH4 is an ARM Cortex-M0+ based microcontroller from NXP. The NXP MKL15Z32VLH4 is used in a wide range of applications, ranging from consumer to industrial, ranging from simple applications to complex systems.

Application Fields

The MKL15Z32VLH4 supports communication protocols such asI2C, SPI, UART, I2S and CAN which makes it ideal for embedded applications such as digital signal processing, communications, home automation, automotive, consumer devices, industrial controls, digital signage, medical devices and wearables. The microcontroller can operate at up to 48MHz and incorporate a variety of features such as Flash EEPROM and SRAM, Timer / Counters, Watchdog, Internal oscillator, DMA and Sleep mode. The MKL15Z32VLH4 also supports on-chip ROM and Pin Multiplexing.

The MKL15Z32VLH4 is particularly suitable for applications that require good performance at a lower cost like medical monitoring, industrial automation and energy management, as well as consumer products like home appliances, smart wearables and small home electronic devices.

Working Principle

The core of the MKL15Z32VLH4 is based on ARM Cortex-M0+ processor which incorporates the most efficient and cost effective ARMv6-M architecture features. The processor is a 32-bit processor and runs at up to 48MHz, with a memory range of up to 2MB. It supports up to 256KB of Flash memory, up to 32KB of RAM, and up to 16KB of SRAM. The processor operates on a single power supply of 1.8 to 3.6 volts.

The MKL15Z32VLH4 provides communication and error detection capabilities through an integrated flexible watchdog timer, additional clock sources, timers, communication peripherals and external memory interface. Multiplexing pins used to control external switches and direct power supply are also incorporated on the microcontroller.

The MKL15Z32VLH4 supports development boards like the NXP KL15Z32 for easier and faster code development. It uses a sophisticated code optimization system to maximize speed and accuracy of the application development. The processor is programmable in assembler and C/C++, with over 65000 instructions. The Flash EEPROM and SRAM provide the ability to store application data in the MCU’s memory for greater flexibility and remote updating.

The MKL15Z32VLH4 is capable of operating with both low power and high-performance operating modes. Its low-power modes allow it to operate in a variety of power situations while maintaining power efficiency and minimize power consumption. The sleep mode allows the processor to go into lower power modes and be resumed quickly with minimal power loss.

The NXP MKL15Z32VLH4 is a powerful, low-cost microcontroller, perfect for applications that need good performance at a lower cost. Its wide array of features, flexible architecture, and impressive performance make it ideal for embedded applications.

The specific data is subject to PDF, and the above content is for reference