MKL14Z64VFT4

Program Memory Type:	FLASH
Base Part Number:	MKL14Z64
Supplier Device Package:	48-QFN (7x7)
Package / Case:	48-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 105°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 15x12b
Voltage - Supply (Vcc/Vdd):	1.71 V ~ 3.6 V
RAM Size:	8K x 8
EEPROM Size:	--
Series:	Kinetis KL1
Program Memory Size:	64KB (64K x 8)
Number of I/O:	40
Peripherals:	Brown-out Detect/Reset, DMA, LVD, POR, PWM, WDT
Connectivity:	I²C, LINbus, SPI, UART/USART
Speed:	48MHz
Core Size:	32-Bit
Core Processor:	ARM® Cortex®-M0+
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MKL14Z64VFT4

The MKL14Z64VFT4 is an energy-efficient, Arm based, low-power, high-performance microcontroller from the Kinetis L family. It has a 32-bit Cortex-M0+ processor, 1 Touch & Sensing (TSI) module, 1 16-bit timer, 1 24KB SRAM, 1 64KB Flash memory, 8 DMA channels and an RTC module. The maximum operating frequency is 48 MHz. The MKL14Z64VFT4 is ideal for applications that have tight performance requirements but need notably low power consumption.

Applications of MKL14Z64VFT4

The MKL14Z64VFT4 is suitable for a wide range of applications including motor control, fitness and wellness products, medical monitoring, industrial automation, consumer electronics, wired home and office applications, and wearable electronics. It is designed to enable engineers to quickly create solutions that have the performance, size, and design factors needed to stay ahead of the competition.The MKL14Z64VFT4 can be used in automotive applications such as in-vehicle infotainment systems, advanced metering infrastructure, vehicle health management, and remote diagnosis and repair services. It is also used in industrial applications where energy management, intelligent control systems, process monitoring and control, and predictive maintenance are used. With its low power consumption and integrated memory, the MKL14Z64VFT4 is an ideal choice for these applications.

Working Principle of MKL14Z64VFT4

The core of the MKL14Z64VFT4 is the Cortex-M0+ processor, which is the latest version of the Cortex-M0 processor and has been optimized for low power, high performance, and low cost. The Cortex-M0+ core is compatible with the existing Cortex-M0 instruction set, allowing code written for Cortex-M0 to be reused on the MKL14Z64VFT4 with few or no modifications. The Cortex-M0+ processor supports a rich set of peripherals, including Touch & Sensing (TSI) modules, 16-bit timers, 24KB SRAM and 64KB internal flash. It also includes 8 DMA channels to reduce processor load, and an on-chip oscillator.The Cortex-M0+ processor supports various low-power sleep modes, which are used to optimize power consumption and battery life during idle periods. When active, the Cortex-M0+ processor can run up to 48 MHz and can switch between various clock modes to maximize performance and power efficiency.

Conclusion

To sum up, the MKL14Z64VFT4 is a low-power, high-performance microcontroller from the Kinetis L family. It is ideal for applications that have tight performance requirements but need low power consumption. It has a 32-bit Cortex-M0+ processor, 1 Touch & Sensing (TSI) module, 1 16-bit timer, 1 24KB SRAM, 1 64KB Flash memory, and 8 DMA channels. The maximum operating frequency is 48 MHz. It is suitable for a wide range of applications, including automotive, industrial, and consumer electronics. The core of the MKL14Z64VFT4 is the Cortex-M0+ processor, which supports a rich set of peripherals and various low-power sleep modes to optimize power consumption and battery life.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description