MNR04M0ABJ220

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, are an aggregate of multiple resistors that are used in a variety of electronic circuits to provide a controlled amount of resistance. One of the most commonly used resistor networks today is the MNR04M0ABJ220. In this article, we will discuss the application field and working principle of the MNR04M0ABJ220 resistor network.

MNR04M0ABJ220 is a type of resistor network with four thin-film resistors connected in a surface mount package. This network provides a total of 220 ohms of resistance across its four resistors. The MNR04M0ABJ220 is used in various applications where a controlled amount of resistance is required.

One of the primary applications of the MNR04M0ABJ220 is in power supply filtering. It is used to filter out any unwanted high frequency noise from the power supply line that could otherwise damage sensitive electronic components. The MNR04M0ABJ220 resistor network also finds use in noise reduction applications. It is used to reduce the amount of noise emanating from sensitive electronic components, such as low-noise amplifiers and active filters.

The MNR04M0ABJ220 can also be used in oscillator circuits. These circuits use pairs of resistors to provide a frequency-dependent signal across the network. The MNR04M0ABJ220 is useful in this regard because its resistors are closely matched and have a low output resistance which ensures a steady and accurate frequency output.

The MNR04M0ABJ220 is also used in pulsed power applications. It is used to convert direct current into a high-voltage pulse that can be used to operate a variety of electronic components. This resistor network is also useful in high-power RF rectifier circuits. The MNR04M0ABJ220 is used to dissipate high-power RF energy and provide a stable DC voltage output.

The working principle of the MNR04M0ABJ220 is fairly straightforward. The resistors of the network are connected in parallel with each other. When current passes through the network, the voltage will be divided among the resistors. The amount of voltage dropped across each resistor will be proportional to the resistance of each resistor. By choosing the appropriate resistance values for the resistors, the desired overall resistance of the network can be attained.

In summary, the MNR04M0ABJ220 is a resistor network that provides four, closely matched resistors in a surface mount package. This network finds a variety of uses in electronic applications ranging from power supply filtering to pulsed power. Its working principle is straightforward; the resistors are connected in parallel and their resistance determines how the voltage is distributed.

The specific data is subject to PDF, and the above content is for reference