MNR04M0APJ240

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are widely used in many industries, MNR04M0APJ240 is one of them. As a kind of resistor network array, it can help to provide better control for its applications.

In practical applications, the resistor network can offer more accurate control than normal signal connections. With its wide capability to adjust the signal signal, it helps to offer current and voltage control for systems. And the MNR04M0APJ240 is designed for working within the range of 0.5 - 32 watts.

In summary, the core function of MNR04M0APJ240 is its ability to provide control over current and voltage. It is designed with consideration for voltage droop issues in DC-DC converter that it may cause. With assistance of this network array, this issue can be avoided.

In terms of its working principle, the MNR04M0APJ240 uses a slide potentiometer to control the required output current and voltage. The power MOSFET device as shown in the figure is used to control the flow of current and voltage. It is connected with the voltage and current sensing circuit.

The voltage sensing circuit is connected to the input and output terminals of the converter, and a voltage feedback is generated. This feedback signal is converted into electrical signal and sent to the PWM/PFC controller. The controller controls the gate-source voltage of the power MOSFET according to the user-defined parameters. When needed, it may apply active voltage droop or fixed-current information to modify the output voltages or current.

The current sensing circuit is used to sense the output current level of the device. It is connected to the output side of the converter and senses the amount of current flowing through the load. The sensed electrical signal is sent to the PWM/PFC controller to adjust the gate voltage of the power MOSFET. Thus, the user can regulate the output current level of the converter.

To ensure the stability of the system, a gate resistor may be used to setup a limit on the gate resistance. This will help in controlling the MNR04M0APJ240 under the defined parameters. Moreover, a bypass capacitor may be used to filter the PWM/PFC signal of the hybrid converter.

In conclusion, the MNR04M0APJ240 is a resistor network array. It is suitable for controlling the voltage and current level of the power system. The core function of it is controlling the output current and voltage. By adjusting the voltage and current sensing circuits, using the power MOSFET and setting the gate resistor, it can ensure the stability of the system.

The specific data is subject to PDF, and the above content is for reference