MNR04MRAPJ150

Number of Pins:	8
Height - Seated (Max):	0.020" (0.50mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	--
Package / Case:	0804, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	MNR
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	15
Circuit Type:	Isolated
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays: MNR04MRAPJ150 Application Field and Working Principle

Resistor networks and arrays have been used in electrical and electronic circuits for a variety of applications, such as providing stable voltage sources, dampening voltage spikes, controlling transients, isolating parts of a circuit, and more. One of the most popular resistor network series is the MNR04MRAPJ150 series, a miniaturized and surface-mountable resistive network. This article will discuss the application field and working principle of this series.The MNR04MRAPJ150 series resistor networks are ideal for use in many applications, particularly in circuit boards with limited space. They provide a high-quality, reliable electrical connection with a minimum number of pins. In addition, they’re electrically more attractive than generic resistor networks due to their surface-mountable construction. The MNR04MRAPJ150 series have a basic working principle, which can be described as follows.The series consists of a set of resistors arranged in a near-circular arrangement. The resistors have a conductive film (either resistive or capacitive) on each side of the board, and these film electrodes are connected in a parallel circuit. Two end terminals, typically pin heads, are inserted into one end of the board, while the other end is connected to ground. For operation, a voltage is typically present at the two end terminals of the board. As the current flows through the resistors, the voltage at each point along the circuit will depend on the total resistance of the circuit. This means that the potential difference between two points on the resistor array will depend on the resistance of the path between them. The resulting potential difference is then used to measure the resistance of an unknown component.The MNR04MRAPJ150 series can be used in a variety of applications, including control circuits, low-noise audio, high-impedance test equipment, and radio frequency communications. Additionally, they are suitable for use in temperature sensing systems, as their resistance remains constant across a wide temperature range. In order to ensure reliable operation, certain design considerations must be taken into account when using the MNR04MRAPJ150 series resistor networks. Care must be taken to ensure that all the resistors in the network are resistance matched. The temperature coefficient of the resistors should also be taken into account in order to avoid unexpected temperature-dependent changes to the resistance of the resistors. Additionally, the capacitive and resistive film electrodes must be kept clean in order for the network to operate as intended. The MNR04MRAPJ150 series is a popular choice for resistor networks and arrays, due to its small size, reliable operation, and wide range of applications. By understanding their working principle and design considerations, designers can create cost-effective, efficient solutions with minimal risk of failure.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description