MOC3082FVM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of electronic component used to create a galvanic barrier, thereby protecting sensitive circuitry from voltage spikes, surges, and transients. MOC3082FVM is an optoisolator suitable for controlling Triacs or SCRs when a digital signal is present. This article will discuss the application field and working principle of the device.

The MOC3082FVM is a zero-cross optoisolator used to control loads such as Triacs and SCRs. The device consists of a 4-pin surface mount package including an infrared LED and a phototriac output. It is designed for AC circuits operating up to 600V.

The MOC3082FVM has an input current range of 1mA to 10mA. When the LED is activated by an input current of 1mA, the phototriac will fire as soon as the AC voltage reaches zero or crosses the threshold voltage. This allows the load to be digitally switched using a low voltage logic signal.

The MOC3082FVM has several applications. One of the most common applications is in motor control systems. The device can be used to fire the Triac or SCR in response to a reference signal from the motor\'s controller. This allows for precise control of the speed and direction of the motor.

Another application is in lighting control systems. The MOC3082FVM can be used to control ordinary lamps or light dimmers using digital logic signals. The device can be used to modulate the lamp\'s brightness by controlling the triggering of the Triac or SCR.

The device has a built-in snubber network which reduces electrical noise generated by the switching of the load. This makes it suitable for use in systems that require low-noise operation. The device also features an integrated fast-response opto-coupler which allows it to switch the load with minimal delay.

The MOC3082FVM works by converting a digital logic signal to an optical signal which is then converted back into a digital signal to control the Triac or SCR. The device consists of an infrared LED and a 4-pin phototriac package that switches the load when activated. The LED is triggered by a logic signal, which then causes the phototriac to fire the load when the AC voltage reaches zero or crosses a predetermined threshold.

The MOC3082FVM is a versatile device suitable for a wide range of AC control applications. It can be used to control motor speed, lighting, and other AC loads with precise timing and low-noise operation. The device can accept logic signals from a variety of sources, allowing for a wide range of control scenarios.

The specific data is subject to PDF, and the above content is for reference