MOC3062TVM

Current - LED Trigger (Ift) (Max):	10mA
Approvals:	IEC/EN/DIN, UL
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.3V
Turn On Time:	--
Current - Hold (Ih):	500µA (Typ)
Series:	--
Static dV/dt (Min):	600V/µs
Voltage - Off State:	600V
Voltage - Isolation:	4170Vrms
Number of Channels:	1
Zero Crossing Circuit:	Yes
Output Type:	Triac
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MOC3062TVM is a type of optoisolator in the triac, SCR output category, which serves an array of purposes and is widely used in many different electrical circuits. Its main function is to provide an isolated gate (trigger) voltage in order to control power delivery to the main circuit. This makes it especially well-suited for use in negative-transistor logic (NTL) circuits, where two power sources must be connected but are electrically isolated from one another.The MOC3062TVM is a three-terminal, medium-power optoisolator, specifically built to drive AC or DC loads in electronic circuits. It consists of an optically coupled MOC3062 and a MOC301x zero crossing detector. The optically coupled MOC3062 device consists of an infrared light-emitting diode (IRED), which is optically coupled to a phototriac over a gap separation. The MOC301x is a voltage regulator/zero crossing detector, which contains an SCR and is used to control DC or AC current.The MOC3062TVM provides a high degree of electrical isolation between the input and output for use in many different applications. It is very resistant to electrical interference, as the opto-isolator creates an electrical barrier that prevents unwanted voltage and current to pass through. This makes it great for use in industrial systems where high voltage spikes or inductive loads could create hazardous conditions.The working principle of the MOC3062TVM is based on the opto-isolation between the input and output. When an electrical signal is applied at the input side, the light emitting diode (LED) will produce photons, which, in turn, are detected by the phototriac on the output side. This triggers the instantaneous release of the stored energy in the SCR of the MOC301x, thus activating the high voltage or current.The MOC3062TVM is a no-voltage and no-current isolator that is used in various industrial and commercial applications. It can be used as a phase control device for dimmers, light controls, AC motor speed controllers, power factor controllers, and noise suppressors. It can also be used in relay and timer systems, appliance control and interface circuits, power supplies, and other ele

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description