MOC3020VM Isolators

Current - LED Trigger (Ift) (Max):	30mA
Approvals:	IEC/EN/DIN, UL
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.15V
Turn On Time:	--
Current - Hold (Ih):	100µA (Typ)
Series:	--
Static dV/dt (Min):	--
Voltage - Off State:	400V
Voltage - Isolation:	4170Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components that are used to electrically isolate circuits and reduce the risk of electric shock. The MOC3020VM is a 6-pin, zero-crossing optoisolator with triac and SCR outputs. This device is used in a wide variety of applications including switching power supplies, industrial and domestic motor control, and lamps or other lighting sources.The MOC3020VM consists of an LED optically coupled to a triac or SCR output stage. It acts as an interface between logic signals and higher voltage circuits.The device is designed to be used with a 3.5-24V power supply and has a maximum input voltage range of 1.7-10V. It can operate over a temperature range of -55°C to +150°C.The device is triggered during each half-cycle of the AC waveform when the voltage reaches 12V or greater. At this time, the LED will turn on and current flows through the LED\'s internal photodetector diode. This current is then amplified by the triac or SCR output stage and the optoisolator will switch between open and close states as the voltage alternates.In addition, the MOC3020VM has numerous protection features including short-circuit and over-voltage protection. When a short circuit is detected, the device will reduce its output voltage to protect against damage. Similarly, the device will automatically shut off and turn back on once the voltage returns to normal.The MOC3020VM is a versatile component and can be used to control numerous electrical and electronic circuits. These include motor control, lighting dimmer circuits, digital control for AC and DC systems, lighting control in appliances, and energy-saving lighting systems.Overall, the MOC3020VM is a robust optoisolator with triac and SCR outputs, and is designed for a wide range of applications. It is a reliable and efficient component that can be used with 3.5-24V power supplies and has built-in protection features to ensure safety and reliable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description