MOC3022S-TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that isolate electric circuits from each other, using optical transmission of signals in the form of light. MOC3022S-TA is a type of optoisolator which is based on a triac or SCR (Thyristor) output. Insulation of different circuits is achieved by using a light-emitting diode, typically an infrared LED, to transmit the signal as a digital signal, which is then received by a photodetector on the other side.

The MOC3022S-TA is specifically designed for applications requiring isolation in the presence of a high AC or DC voltage. The device is a zero-cross optoisolator, meaning the triac/SCR output is trigged only during the zero-crossing period of an AC waveform. This helps reduce stress on the triac/SCR and associated circuitry and also minimizes radio frequency interference. It has a peak isolation voltage rating of 3000VRMS per UL1577 for 1-minute.

The MOC3022S-TA consists of an infrared light-emitting diode, a high-voltage integrated circuit with isolated chip packages, and a optically coupled silicon zero-cross detector. The device also includes a built-in desaturation protection, which only activates the output when the input voltage is below its holding voltage level. The device is designed to operate with a low input current of 4mA and an operating temperature range of -40°C to +125°C.

The working principle of the MOC3022S-TA is based on the light transmission between the input circuit and the output circuit. An AC input voltage is applied to the optoisolator circuit, which results in the emission of light from the infrared LED on the input side. The SCR/triac is then triggered after the light is detected by the optoisolator on the output side. When the input voltage is below its holding voltage level, the output is disabled. This allows for a high level of isolation between the input and output circuit.

The MOC3022S-TA optoisolator is suitable for a variety of applications, including AC motor controls, switching relays, motor speed control, and many other power control applications. It is commonly used in AC or DC high voltage environments, such as an environment with a rated voltage of up to 300VRMS. The use of the device in electrically noisy environments is also common, as the device provides excellent isolation from the circuit it is connected to.

In conclusion, the MOC3022S-TA is a zero-cross optoisolator with a triac/SCR output which is designed to provide insulated control of AC and DC circuits in environments with high voltages. Its built-in desaturation protection ensures that it only triggers the output when the input voltage is below its holding voltage level. The device is suitable for a variety of applications, including AC motor controls, switching relays, motor speed control, and many other power control applications.

The specific data is subject to PDF, and the above content is for reference