MOC3023S-TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3023S-TA is a type of optoisolator which belongs to the family of triac and SCR output. It was commonly used in peripheral devices and industrial modem and in motor control applications. This component is mainly used for isolating and controlling AC electrical circuits. It was usually used for switching AC voltage even when controlling applications such as dimmers, HVAC systems, fluorescent light ballasts, etc.

The optoisolator typically consists of a LED which is coupled with a photodiode. The LED works as an input while the photodiode acts as the output. It is designed to provide electrical isolation between two different circuits by transferring the signal from one circuit to another using light. This eliminates the need for grounding the circuits.

The MOC3023S-TA features a full 6000Vrms isolation between input and output circuits. It has a high photocurrent transfer ratio (>50%) and low voltage drop (<1.0V) when coupled with the MCT3023 series TRIACs. It also has a high creepage distance of 8mm. It works on a wide operating temperature range of -40°C to 105°C.

The working principle of the MOC3023S-TA is quite simple. The LED input is connected in series with a resistor and the input circuit, and the photodiode output is connected in series with a TRIAC and then the output circuit. When AC power is applied to the input circuit, the LED will light up and cause the photodiode to conduct current. This current is then supplied to the TRIAC and its gate voltage is driven high, thus allowing current flow through the output circuit. When the input circuits AC power is turned off, the LED will turn off and the TRIAC will turn off.

The MOC3023S-TA can be used in variety of applications ranging from motor control, dimmers, HVAC systems, fluorescent light ballast, etc. They can also be used for various types of switching electronics and in industrial modems. They provide a high level of isolation for the interconnected circuits and offer a reliable and consistent operation in a wide range of conditions.

In conclusion, the MOC3023S-TA is a reliable and efficient optoisolator which belongs to the family of triac and SCR output. It offers high level of isolation between input and output circuits and can be used in a wide range of applications. The working principle of this component is quite simple and it can provide reliable and consistent operation in a wide range of conditions.

The specific data is subject to PDF, and the above content is for reference