MOC3023SM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3023SM is a type of optoisolator that features high isolation voltage, low drive current requirements, and is suitable for series connection of low voltage AC or DC loads. It is a member of the Melexis family of optocouplers, which are commonly used in a variety of industrial applications.

An optoisolator MOC3023SM has three well-defined terminals: main terminal, control terminal and common terminal. It consists of an infrared emitter, optically coupled to a triac which is triggered on or off by applying a voltage or current at its control terminal. The emitter LED is used to control the operation of the triac, which in turn controls the load connected in series with it.

When the LED inside the MOC3023SM is illuminated, the triac is triggered and current flows through the control terminal, causing the load to turn on or off. This optoisolator can be connected in either positive or negative logic mode, allowing it to interface with both digital and analog voltage/current sources. Since it operates at low voltages, it is useful for applications that require isolated control of AC or DC loads.

The MOC3023SM is especially suited for applications such as medical equipment, home appliances, motor controls, and lighting control. In these applications, the optoisolator provides an isolation barrier between the control side and the load side, protecting the electronics on the control side from high voltage shock or transient noise, as well as preventing ground loop current from flowing through the circuit.

The MOC3023SM optoisolator uses a standard integrated circuit (IC) package, allowing it to be used in a variety of space constrained applications. It also has an exceedingly low propagation delay, making it suitable for operation in high speed applications with short response times. The working temperature range of this optoisolator is -40°C to 85°C.

The typical applications and operating principle of the MOC3023SM can be summarized as follows:

• MOC3023SM is used to control AC or DC loads, providing voltage and current isolation between the control side and the load side, as well as protection from high voltage shock and transient noise.
• It is an optically coupled triac, triggered by a controlling voltage or current at its control terminal.
• It can be connected in either positive or negative logic mode, and is suitable for use in high speed applications.
• It is typically used in medical equipment, home appliances, motor controls, and lighting control.

The MOC3023SM optoisolator is a reliable and versatile component for a variety of applications requiring isolated control of AC or DC loads. Its wide operating temperature range, low propagation delay, and standard IC package make it suitable for use in even the most demanding applications.

The specific data is subject to PDF, and the above content is for reference