MOC3042M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers or photocouplers, are electrical components designed to allow signals to be transmitted between two separate circuits, while maintaining electrical isolation. The MOC3042M is a particular type of optoisolator, known as a Triac, SCR Output optoisolator.

The MOC3042M is a single-channel, zero-crossing optocoupler, with an MOC3042 four quadrant, TRIAC driver optoelectronic device. This type of optoisolator is typically used to provide isolation between low-voltage control signals and higher-voltage power outputs. This makes it invaluable in applications where power isolation is needed to protect the control system.

The MOC3042M has a maximum transfer voltage of 600 volts and a maximum peak repetitive current of 9.1 mA. It has a minimum insulation voltage of 1.5 KV, and a maximum insulation resistance of 1 G ohms.

In its most basic form, the MOC3042M consists of an LED, resistor, and an optically coupled TRIAC. The LED is connected, in series with a 100 ohm resistor, to a 4-8V DC supply. When the LED is forward-biased, it emits an infrared light which reaches the Optically Coupled TRIAC. When this occurs, the TRIAC is triggered, causing it to switch on and complete the circuit.

The MOC3042M is designed to be triggered at a tiny fraction of a second before the peak of the line voltage waveform reaches zero. This minimizes the amount of SCR turn-off time and current-tail current, thus reducing power dissipation. This is useful in applications which require very fast switching times, such as low-power switching in power supplies or control circuits.

The MOC3042M is typically used in fluorescent lighting and electric motor circuits. It is also widely used in high-power switching applications, such as motor speed controllers, AC power dimmers, and line voltage regulators. The MOC3042M is also ideal for low-power applications, such as temperature controllers, liquid level controllers, and process control circuits.

The MOC3042M is easy to use and reliable. It has a high insulation voltage which ensures safety in all environments. It is also available in a wide variety of packages, making it easy to incorporate into existing designs. The MOC3042M is a highly versatile optoisolator, and is an excellent choice for applications where power isolation is needed.

The specific data is subject to PDF, and the above content is for reference