MPG06B-E3/53

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are fundamental elements in electricity circuits and are used in countless applications. A solid-state device known as the MPG06B-E3/53 is a rectifier with a single inline package. It is a three-terminal device, typically used for the rectification and stabilization of power supplies due to its low forward voltage and high reverse voltage capability. It is also used in photovoltaic, automotive, and telecommunication applications.

When operating, the MPG06B-E3/53 is specified to have a maximum forward voltage drop of 0.7V-0.8V at a continuous current of 4A. The device also has a reverse recovery time of less than 4 nanoseconds. The operating temperature range of the device is between -30°C and +150°C.

The working principle of the MPG06B-E3/53 is based on the PN-junction of the diode. A PN-junction is essentially an imbalance of electrons and holes on either side of a single junction, which results in an internal electric field. In the rectifying mode, current flows from the Anode to the Cathode when the anode is at a higher potential than the cathode, allowing the diode to act as an electronic switch.

When operating in the rectifying mode at a certain forward bias, either the N-doped or P-doped types of the diode will initiate a plate-out phenomenon in which some electrons and holes will plate out and bridge the junction. This process results in the creation of a dead zone and a soft breakdown of the junction, which allow the MPG06B-E3/53 to handle higher reverse voltages.

In addition to its rectifying capabilities, the device can also be used to stabilize power supplies. This is accomplished by controlling the switching of the Anode and Cathode bands, which produces an output voltage that is independent of the load impedance. The operating frequency of the device is typically between 25KHz and 1MHz, allowing it to respond quickly to changes in the load.

The MPG06B-E3/53 is one of the most popular rectifiers with single-inline package and is widely used in different applications. It has low forward voltage drop and can withstand high reverse voltage, making it an ideal choice for power supplies. In addition, its unique design allows for a fast switching time, making it suitable for other applications as well, such as photovoltaics, automotive electronics, and telecommunication.

The specific data is subject to PDF, and the above content is for reference