MTZJ2V4SA R0G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	2.43V
Tolerance:	±2%
Power - Max:	500mW
Impedance (Max) (Zzt):	100 Ohms
Current - Reverse Leakage @ Vr:	120µA @ 1V
Operating Temperature:	-55°C ~ 175°C (TJ)
Mounting Type:	Through Hole
Package / Case:	DO-204AG, DO-34, Axial
Supplier Device Package:	DO-34

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MTZJ2V4SA R0G is a single Zener diode that is designed for use in a variety of applications. It is manufactured by MECO and has a maximum continuous reverse voltage rating of 4.00 volts. Its maximum continuous forward current rating is 5.00 amps. Its maximum peak reverse voltage rating is 4.00 volts with a minimum reverse breakdown voltage of 2.00 volts.The purpose of a Zener diode is to maintain a specific reverse voltage across the diode’s terminals regardless of the amount of current passing through it. It will not increase the voltage beyond its predetermined setting, thus providing a form of protection to the circuit it is used in. It is important to select the correct Zener diode for each application to ensure its intended desired result.For the MTZJ2V4SA R0G, its reverse breakdown voltage is the primary factor in determining a successful application. The reverse breakdown voltage is the voltage at which the diode transitions from a low conductive state to a highly conductive state and is normally listed in the manufacturer’s datasheet. Since the MTZJ2V4SA R0G’s reverse breakdown voltage is 2.00 volts, it is suitable for use as a clamping device in applications where the circuit voltage must not exceed this set voltage. It can also be used in power supply circuits to prevent the circuit supply voltage rising above its set value.In addition to its reverse breakdown voltage, the MTZJ2V4SA R0G has a maximum power dissipation rating of 500 mW which is determined by its forward current rating. To ensure the device is not damaged due to excessive power dissipation, consideration must be taken to ensure the device is not overloaded and its operating temperature is correctly managed.The MTZJ2V4SA R0G also has a maximum reverse voltage rating of 4.00 volts and a maximum forward voltage rating of 0.6 volts. The maximum forward voltage of the device determines the amount of voltage drop across the diode when a current is passed through it. Depending on the application, this voltage drop may need to be considered to ensure the circuit’s operation remains within its desired parameters.The MTZJ2V4SA R0G is available in a small surface-mount package which makes it suitable for use in compact electronic applications. It is often used in consumer electronics and automotive electronics, such as voltage regulating circuits, audio power amplifiers and signal conditioning circuits. It is also used in test and measurement equipment and laboratory equipment, where the reverse voltage must be regulated to obtain a specific desired result.In conclusion, the MTZJ2V4SA R0G is a single Zener diode, with a reverse breakdown voltage of 2.00 volts and a maximum forward voltage of 0.6 volts. It has a maximum power rating of 500 mW and is suitable for use as a voltage clamping and regulating device. It is widely used in consumer electronics, automotive electronics, test and measurement equipment and laboratory equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description