MVE50VC221MJ10TP

Series:	MVE
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Capacitance:	220µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	1.055 Ohm @ 120Hz
Lifetime @ Temp.:	2000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	375mA @ 120Hz
Lead Spacing:	--
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.394" (10.00mm)
Surface Mount Land Size:	0.406" L x 0.406" W (10.30mm x 10.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electronic circuits due to their high capacity, low cost, and wide range of voltage ratings. They are made of two aluminum foils, each coated with an insulating oxide layer, separated by a moistened absorbent spacer material. The oxide layers function as dielectric, and the electrolyte ions form a conductive bridge between the capacitor plates.The MVE50VC221MJ10TP is an axial lead, aluminum electrolytic capacitor from Nichicon. This device is a long life, bi-polarized component designed for use in AC DC and high temperature applications. It has a rated capacitance of 221μF at a rated voltage of 50V, and is characterized by a maximum temperature of 105°C.The MVE50VC221MJ10TP is typically used in power supply circuits, smoothing and buffering circuits, and coupling or decoupling of high frequency signals. This device features a hybrid-blended electrolyte, which enables it to provide superior temperature stability and improved long term reliability. The Kyocera Corporation\'s Advanced Self-Healing Technology (ASHT) makes it resistant to damage caused by surge current.The electrostatic capacity of the MVE50VC221MJ10TP is determined by the voltage at the terminals (V) and the surface area of the anode to the cathode (S): C=ε*S/d. The value ε is the dielectric constant of the insulating oxide layer. This value is effectively constant, between 4 and 5, for all aluminum electrolytic capacitors. The surface area can vary with different manufacturers, as can the thickness (d) of the dielectric layer. Therefore, the larger the surface area, the higher the capacitance of the capacitor.The MVE50VC221MJ10TP is also characterized by its internal resistance (ESR) and its ability to store and release energy quickly (the charge/discharge rate). The ESR is a measure of the material resistance in the capacitor, and varies depending on size and design. The smaller the ESR, the better. Similarly, the charge/discharge rate is also dependent on the size and design of the device. The lower the charge/discharge rate, the better.The MVE50VC221MJ10TP is an aluminum electrolytic capacitor manufactured by the world-renowned Nichicon Corporation. This device is ideally suited for use in power supplies and smoothing/buffering circuits, due to its high capacitance, low cost, and wide range of voltage ratings. Its hybrid-blended electrolyte also makes it well-suited for use in high temperature applications. Additionally, its inherent self-healing capabilities make it a reliable choice for systems requiring surge protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description