Allicdata Part #: | MW7IC930GNR1-ND |
Manufacturer Part#: |
MW7IC930GNR1 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | NXP USA Inc |
Short Description: | IC PWR AMP RF 900MHZ TO-270-16 |
More Detail: | RF Amplifier IC W-CDMA 728MHz ~ 768MHz, 920MHz ~ 9... |
DataSheet: | MW7IC930GNR1 Datasheet/PDF |
Quantity: | 1000 |
Specifications
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Frequency: | 728MHz ~ 768MHz, 920MHz ~ 960MHz |
P1dB: | 44.9dBm |
Gain: | 36.8dB |
Noise Figure: | -- |
RF Type: | W-CDMA |
Voltage - Supply: | 32V |
Current - Supply: | 340mA |
Test Frequency: | 940MHz |
Package / Case: | TO-270-16 Variant, Gull Wing |
Supplier Device Package: | TO-270 WBL-16 GULL |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to MW7IC930GNR1
The MW7IC930GNR1 is an RF/microwave interactive power amplifier (IPA) for core and amplifier applications. It’s specifically designed to deliver superior performance in mobile communication applications, such as LTE and WiMAX. It functions as an ultra-low distortion, high gain, medium power, and 50/75 ohm matched power amplifier in a diverse range of RF and microwave applications.Application Field of MW7IC930GNR1
As a high-performance power amplifier, the MW7IC930GNR1 can be used in mobile communications such as LTE and WiMax. It can also be used in broadband and two-way radio communication systems, high-sensitivity satellite receivers, base station amplifiers and many other RF applications.The large dynamic range over which the MW7IC930GNR1 operates makes it well-suited for a wide range of applications in base stations, defense, cell phone, and microwave instrumentation systems. Since it features excellent linearity and high power output, this IPA is ideal for complex spectral applications requiring clean, distortion-free signals.Working Principle of MW7IC930GNR1
The core of the MW7IC930GNR1 consists of nine transistor cells, where each cell contains both push-pull amplifiers. The high and low side of each cell are connected to the ground as well as to a common output. Each of these nine cells has two ports; State Control (SC) and Input Control (IC). The SC port is used to control the operating current of the push-pull amplifiers which regulates the output power. The IC port is used to control the input signal to the push-pull amplifiers which determines the output gain. The gain of the amplifier is directly proportional to the input power, so the output power can be controlled by adjusting the input control.This amplifier, too, is designed with active power control that tracks the instantaneous output power profile and maintains the desired gain by automatic adjustment of the operating current. The active power control also helps to reduce over-current and over-temperature conditions.The excellent linearity of the MW7IC930GNR1 makes it ideal for challengingapplication areas that rely on precise signal resolution and minimal distortion. The low-noise operation and wide dynamic range of this amplifier make it suitable for demanding high-sensitivity radio receiver systems.Conclusion
The MW7IC930GNR1 is a high-performance RF/microwave interactive power amplifier (IPA) for core and amplifier applications. It is designed to deliver superior performance in mobile communication applications such as LTE and WiMAX. It is well-suited for a wide range of RF and microwave applications due to its large dynamic range, excellent linearity, high gain, and low-noise and wide dynamic range operation. Its active power control further ensures its safe and reliable operation even under extreme conditions. The MW7IC930GNR1 has been classified into the RF Amplifiers category.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "MW7I" Included word is 20
Part Number | Manufacturer | Price | Quantity | Description |
---|
MW7IC2425NBR1 | NXP USA Inc | 55.45 $ | 500 | FET RF 65V 2.45GHZ TO-272... |
MW7IC2020NT1 | NXP USA Inc | 16.19 $ | 1000 | FET RF 65V 2.14GHZ 24PQFN... |
MW7IC18100NBR1 | NXP USA Inc | 0.0 $ | 1000 | IC PWR AMP RF LDMOS TO272... |
MW7IC2240NBR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 4W TO-272-1... |
MW7IC2725NBR1 | NXP USA Inc | 0.0 $ | 1000 | IC PWR AMP RF 2700MHZ TO-... |
MW7IC2750NBR1 | NXP USA Inc | 0.0 $ | 1000 | IC PWR AMP RF 2700MHZ TO-... |
MW7IC008NT1 | NXP USA Inc | 9.18 $ | 1000 | IC PWR AMP RF 900MHZ 8W 2... |
MW7IC930NR1 | NXP USA Inc | 23.16 $ | 469 | IC PWR AMP RF 900MHZ TO-2... |
MW7IC915NT1 | NXP USA Inc | -- | 1000 | IC PWR AMP HV7 900MHZ 15W... |
MW7IC930NBR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 900MHZ TO-2... |
MW7IC18100GNR1 | NXP USA Inc | 0.0 $ | 1000 | IC PWR AMP RF LDMOS TO270... |
MW7IC18100NR1 | NXP USA Inc | 0.0 $ | 1000 | IC PWR AMP RF LDMOS TO270... |
MW7IC930GNR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 900MHZ TO-2... |
MW7IC2240NR1 | NXP USA Inc | 31.16 $ | 1000 | IC PWR AMP RF 4W TO-270-1... |
MW7IC2040NR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 1990MHZ TO-... |
MW7IC2725GNR1 | NXP USA Inc | 31.99 $ | 1000 | IC PWR AMP RF 2700MHZ4W T... |
MW7IC2725NR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 2700MHZ TO-... |
MW7IC2240GNR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 4W TO-270-1... |
MW7IC2040NBR1 | NXP USA Inc | -- | 1000 | IC PWR AMP RF 1990MHZ TO-... |
MW7IC2425GNR1 | NXP USA Inc | 59.62 $ | 1000 | IC PWR AMP RF 2400MHZ4W T... |
Latest Products
HMC667LP2
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
TQM7M9023H
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
HMC406MS8GTR
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
ALM-GP003-BLKG
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
PTMA210452EL V1 R250
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
MGA-30116-BLKG
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...