MW7IC930NBR1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Modern radio frequency (RF) devices are smaller and increasingly more powerful. To meet the requirements of today’s high-frequency applications, many RF amplifiers have been developed. The MW7IC930NBR1 is one such device.

The MW7IC930NBR1 is a low noise amplifier (LNA) designed for the cellular bands from 850 MHz to 1900 MHz. It is housed in an ultra-compact 3mm x 3mm, 16-pin QFN package. This device provides excellent linearity performance (P1dB, IP3, and Gain flatness) with an ultra-low noise figure. It is designed to meet the requirements of the latest cellular amplifier systems.

The MW7IC930NBR1 is a highly-integrated single-stage LNA. It has a low power dissipation and requires no bias components. It is fabricated using advanced 0.18μm CMOS technology and features a wide operating supply voltage range of 1.9 V to 5.5 V. The chip includes an on-chip active bias network, which provides a noise figure of 0.65 dB, a gain of 24.5 dB, and an IP3 of 30 dBm.

The MW7IC930NBR1 provides a highly integrated solution for cellular amplifier design. Its RF input and output interfaces are well matched to 50 ohms and the LNA has built-in input and output protection. This device also has a wide bandwidth and an unconditional stability of up to 4 GHz. This device is an excellent choice for cellular amplifier designs requiring high linearity and low power consumption.

The working principle of the MW7IC930NBR1 is based on an inductor-capacitor (LC) circuit. This type of circuit is used in most RF amplifiers, and works by exploiting the resonance that occurs when capacitors and inductors are connected together. The resonance occurs at a particular frequency, which is determined by the value of the capacitance and inductance of the components. The MW7IC930NBR1 uses a specially designed LC circuit to amplify signals within a specific frequency range. The signal is amplified by a transistor which is placed in the middle of the LC circuit.

The MW7IC930NBR1 is ideal for use in applications such as cellular base stations, telecom infrastructure, satellite communication systems, wireless LANs, and automotive systems. It can also be used in medical and industrial applications such as MRI, ultrasound, and machine-to-machine communication. The MW7IC930NBR1 is a good choice for intense signal amplification due to its excellent linearity, wide bandwidth, and low power dissipation.

The specific data is subject to PDF, and the above content is for reference