MXLUPT15 Circuit Protection

Series:	*
Part Status:	Active
RoHS Status:	RoHS non-compliant

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the Working Principle of MXLUPT15

The principle of every TVS – Diodes circuitry device, such as the MXLUPT15, is to protect the connected device from overvoltage and transient phenomena. It is thus used to contain voltage surges that could potentially damage the internal components of the connected device, most typically within a micro-controller or electronic system. The MXLUPT15 is a surface mountable Transil diode from TE Connectivity, specifically designed for voltage protection work over a number of frequency ranges.

Components of the MXLUPT15

The MXLUPT15 consists of three primary components. First, there is the Transil diode, which is connected between the supply line of the device to be protected and the ground line. This diode is what effectively limits the maximum peak voltage that can pass through the circuit by clamping it to the breakdown voltage associated with the diode. The second component of the MXLUPT15 is a parallel RC network, which provides a current path for the transient current that results from an overvoltage event. This current path helps reduce the voltage across the device and absorbs the energy that would otherwise have damaged the device. Finally, the third component of the MXLUPT15 is a series resistor, which is connected between the Transil diode and the output of the device to be protected. This component limits the current that can pass through, thus allowing the Transil diode to operate correctly.

Operation of the MXLUPT15

When an overvoltage event occurs, the Transil diode will clamp the voltage to its predetermined breakdown voltage. This voltage will usually be lower than the breakdown voltage of the device to be protected, thereby preventing it from being damaged. The parallel RC network will then direct transient current away from the device and absorb the energy of the voltage surge. Finally, the series resistor limits the current flowing through the circuit, allowing the Transil diode to operate in the correct manner.

Applications of the MXLUPT15

The MXLUPT15 is one of the most versatile solutions for protecting a device from harmful voltage surges. It can be used in a variety of applications, such as automotive and industrial electronics, telecommunications, medical equipment, and consumer appliances. It is also ideal for protecting devices from high-speed transients and low-level overvoltages. It can be used to protect against noise generated by interference or other sources, as well as providing protection from power distribution and lightning surge events.

Conclusion

The MXLUPT15 is a high-performance, surface-mountable TVS / Diode solution specifically designed for voltage protection work over a wide range of frequency ranges. Composed of three primary components, the Transil diode, an RC network, and a series resistor, it is capable of providing reliable and consistent protection from overvoltage events. It can be used in a variety of applications, from automotive and industrial electronics, to consumer appliances and medical equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description