NPT2021

Series:	--
Packaging:	Tube
Part Status:	Active
Transistor Type:	HEMT
Frequency:	0Hz ~ 2.2GHz
Gain:	15dB
Voltage - Test:	48V
Current Rating:	7A
Noise Figure:	--
Current - Test:	300mA
Power - Output:	50W
Voltage - Rated:	160V
Package / Case:	TO-272BC
Supplier Device Package:	TO-272-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of NPT2021

The NPT2021 (Field-Effect Transistor) is a novel advanced power transistor from the world’s leading semiconductor technology provider which provides higher power switching and improved performance within a smaller form factor than its predecessor. The NPT2021 has an enhanced process technology that enables a maximum input voltage of up to 200 volts in conjunction with a channel width of 6.1 mm. The device has serious heat dissipation capability of 10A and an excellent noise figure of under 0.02 dB. It can also provide a wide frequency range operation of 0.1MHz up to 12 GHz.

Field-Effect Transistor and MOSFET

The NPT2021 is built using a Field-Effect Transistor (FET) architecture based on the MOSFET (metal-oxide-semiconductor field-effect transistor) technology. MOSFETs are a three-terminal field-effect transistor consisting of two insulated drain-bases, between which a key gate is located. MOSFETs are widely used to control current, the most common being in power-supply circuits and switching regulators.MOSFETs are able to be independently controlled with a small amount of gate voltage and hence it is used in the design of NPT2021. This becomes invaluable for manufacturers when designing complex high-frequency systems.

Radio Frequency Capabilities of NPT2021

The NPT2021 uses MOSFET technology primarily for its radio frequency (RF) capabilities. RF is used to improve circuit performance or to increase switching speed. Working in the frequency range of 0.1 MHz to 12 GHz, the NPT2021 can perform a number of important functions to improve high frequency circuit performance.The first of these is the ability to dissipate heat effectively, while maintaining its high switching speed, as well as provide an excellent noise figure of under 0.02 dB. Secondly, the high frequency performance also allows for optimized power control and a low applied thermal load for the system.

Design and Applications of NPT2021

The majority of NPT2021 usage is in wireless communication systems, wireless networks, and wireless voice and data applications. Its enhanced performance has also made it an incredibly versatile power supply device for manufactured products.The NPT2021 is available in several packages, from wafer level to full ball grid array and TO-220 package. It is also a low carbon footprint device, which makes it suitable for industrial and automotive environments. This is due to its ability to be energy efficient, with power dissipation and efficiency of 140mW/V and 0.9W/V respectively.

Working Principle

The NPT2021 works based on a MOSFET-based field-effect transistor and its working principle is the same as any other traditional MOSFET-based device. The voltage across the gate and the drain forms an electric field and controls the current flow between the source and the drain.The device is operated in enhancement mode, meaning no gate voltage is required to initiate the flow. The device will remain off until a positive voltage is applied to the gate to initiate the flow of current. Once the gate voltage is applied, the device will turn on and continue to operate until the gate voltage drops below the threshold voltage for the device, meaning it will remain off again until a new gate voltage is applied.

Conclusion

The NPT2021 is an advanced field-effect transistor which offers a great solution for manufacturers looking for a powerful, yet energy-efficient device. The device can be used in a wide range of applications from wireless communication systems to industrial and automotive environments. Its advanced technology and radio frequency capabilities allow for excellent power control, improved switching speed and reduced noise. In addition, the device has low thermal load and carbon footprint, making it the ideal choice for manufacturers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description