P1803UBTP Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

While thyristors can have a wide variety of applications, the P1803UBTP is commonly used for voltage regulation, surge protection, overcurrent protection and ESD/EFT transient protection. This device is a three-terminal thyristor constructed with two PN junctions diodes and one gate control terminal. It has a bidirectional symmetrical blocking voltage, so it can be used in both AC and DC applications.

In a basic thyristor circuit, the voltage waveform is rectified by a diode pair. When the voltage of the waveform drops below the valley point, the thyristor is triggered and allows current to flow. As the voltage rises, the gate becomes less conductive and eventually shuts off, creating a pulses of alternating current. This pulse width modulation is used in various control applications such as motor speed control, dimming control, and power factor correction.

In addition to voltage and current control, the P1803UBTP can also be used to provide high-speed responses to rapidly varying transients. The device has a fast turn-on/turn-off time and a fast dynamic response. It is ideal for applications where voltage and current spikes must be quickly attenuated.

The P1803UBTP is widely used in a variety of power systems due to its high-performance characteristics and is suitable for general-purpose applications where rapid switching is required. It can be used in single-phase or three-phase motor control circuits, AC/DC power supplies, industrial electronic circuits, power tools, LED drivers, and more. This device can handle up to 35A of current and is available in both through-hole and surface-mount packages.

The P1803UBTP is designed with safety in mind and meets the requirements of UL 489 listing. It offers enhanced protection against both overvoltage and overcurrent and can prevent circuit damage from surge pulses. This device has a 4-pin structure with two power pins, one gate pin, and one auxiliary pin. The gate pin is used to control the on/off states of the thyristor, while the auxiliary pin is used as an input to sense circuit status.

In conclusion, the P1803UBTP is an ideal choice for a variety of power control, voltage regulation, surge protection, and ESD/EFT transient protection applications. It offers high performance, fast dynamic response, and enhanced safety features. It is a reliable and cost-effective solution for applications requiring efficient current and voltage control.

The specific data is subject to PDF, and the above content is for reference