P1803UBLRP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a series of solid-state devices that act as a electronic switch for controlling the flow of current. In particular, the P1803UBLRP is a uni-directional blocking triac thyristor with surge protective devices that can handles currents up to 35 amperes. The application of these devices can include motor control, machinery protection, and heating elements in electric ranges and other appliances.

The blocking triac thyristor is defined by its internal structure, and is specifically designed to block the direction of current flow until sufficient voltage is applied. With proper application, the thyristor can act as an electronic switch for controlling the flow of current. This is often called "gate" control, as the current is blocked until the applied voltage at the gate exceeds a certain level.

A key feature of the P1803UBLRP thyristor is its superior surge protection for applications in motor control, machinery, and heating elements. With its capability to handle currents up to 35 amperes, this device can be placed between an input and output or load to provide effective current protection. An internal thermal element monitors the junction temperature of the thyristor, and is designed to reduce the current in the event of a short circuit or overload.

The thyristor is essentially a controlled rectifier that operates in two key ways: controllable conduction and protected conduction. The first operates in response to a gate signal, which must exceed a voltage threshold and cause the device to begin conducting. The device will then remain in the conducting state until the anode-cathode voltage drops below a certain level. On the other hand, the protected conduction eliminates the need for a gate signal and instead relies on current detection in order to begin conducting.

The P1803UBLRP is also a bi-directional thyristor, meaning it can be used to control current in both directions. The device uses several components instead of a single pn-junction, and is constructed with both an anode and a cathode. The gate of the thyristor is connected to a triggered input circuit, and the two main current terminals areAnode A and Cathode C. When the thyristor is powered, current flows from anode to cathode, and when gate voltage exceeds a certain threshold (plus the voltage drop across the device), current flow reverses and flows from cathode to anode.

In addition, the device also has dual thyristor construction, meaning that two thyristors are connected in parallel. This basically provides two independent terminals, meaning that it can be turned on and off more quickly than a single thyristor by using two different gate triggers. Furthermore, the two thyristors operate independently, allowing for greater flexibility in controlling the current.

The P1803UBLRP is an ideal thyristor for controlling current in motor control, machinery, and heating elements. With its ability to handle currents up to 35 amperes and its dual thyristor construction, this device is capable of providing maximum protection and reliability in demanding applications.

The specific data is subject to PDF, and the above content is for reference