PCM1608KY

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PCM1608KY is a low-cost, 10-bit analog-to-digital converter (ADC) with on-chip sample-and-hold (S&H) circuit. It features four input channels, high sampling rate and low power consumption. This ADC is ideal for applications such as medical imaging, industrial instrumentation, automotive and consumer electronics.

The PCM1608KY is capable of operating at sample rates up to 10MHz while consuming only 1.65mW of power. It has an on-chip S&H circuit that can acquire signals up to 20MHz. The signal resolution is 10 bits with a maximum sampling rate of 20MHz. The signal-to-noise ratio is 85dB.

The PCM1608KY is designed to handle analog signals with a wide range of input voltages and currents. It can accept input signals with ranges of -3V to 3V and up to 5mA of current. The S&H circuit can acquire signals up to 20MHz and the filtered output is digitized with 10 bit accuracy. The ADC features an “on-board” amplifier with gain settings of 1, 2, 4 and 8. This helps to ensure that the input signal is amplified before conversion to digital. The digital output from the converter is available through an I2C serial interface.

The PCM1608KY is a versatile ADC suitable for a wide range of applications. It can be used for audio and video signal processing, digital filter design, power management and image analysis. In medical imaging, the ADC is used for electrocardiogram (ECG) and ultrasound signal processing. In industrial instrumentation it is used for motor control and data acquisition. In automotive systems it is used for electronic control and monitoring. In consumer electronic applications it is used for TV and DVD recording.

The working principle of the PCM1608KY is relatively simple. The analog signal is first then amplified and filtered, before being passed to the S&H circuit. The signal is then held and digitized with 10 bit accuracy by the ADC. The output is then passed to the I2C serial interface. The whole process happens quickly and with minimal power consumption.

The PCM1608KY is a versatile, low-power ADC for a wide range of digital signal processing applications. It features four input channels, high sample rate and low power consumption. The on-chip S&H circuit helps to ensure that the input signal is amplified before being digitized with 10 bit accuracy. The device can be used for medical imaging, industrial instrumentation, automotive applications and consumer electronics.

The specific data is subject to PDF, and the above content is for reference