PDZVTR13B

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	14.15V
Tolerance:	±6.01%
Power - Max:	1W
Impedance (Max) (Zzt):	10 Ohms
Current - Reverse Leakage @ Vr:	10µA @ 10V
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	SOD-128
Supplier Device Package:	PMDTM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The PDZVTR13B is a Single Zener Diode device that is commonly used in certain applications where voltage regulation and voltage stability are of utmost importance. It is particularly employed in the areas of power management, switching power supplies and energy conversion, as well as with automotive, medical and communication controls.The PDZVTR13B diode comes in a small DO-41 package, which makes it suitable for a variety of applications with tight space constraints. It has an impressively low leakage current of just 6 uA, with an on-state voltage of 13V and a maximum reverse voltage of 28V. It also has a power dissipation of 600mW and a maximum surge current capability of 5A.The diode’s primary purpose is to stabilise or regulate the voltage within a given circuit or system. It does this by allowing some current to be drawn through it when the circumstances meet the conditions. When the applied voltage is below the set voltage, it will draw current in order to raise the voltage up to the preset limit. When the voltage exceeds the required value, the device will begin to draw a very low current in order to prevent it from getting too high.To illustrate this further, consider a mobile charger as an example. The PDZVTR13B could be used as a voltage regulator to keep the charge to the battery stable, no matter how much current is being drawn. It would ensure that the voltage does not get too high and then subsequently stop any further damage from occurring.The underlying concept behind the working principle of a single zener diode device is the PN-junction. This is the point at which two types of semiconductor material are joined together. When some sort of bias voltage is applied, it causes a depletion region to form across the junction, which restricts the flow of current in both directions. By virtue of this, the diode’s primary purpose is to act as a sort of gatekeeper and prevent any reverse current in the system.The PDZVTR13B is an ideal solution if you’re looking to regulate or stabilize the voltage within a circuit or system. It can help protect the system from potential damage due to excess voltage, as well as provide an extra layer of protection against any surges or spikes in the current. It’s a simple and cost effective way to ensure your project operates as expected in all conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description