PDZVTR6.2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The PDZVTR6.2A is a single diode Zener type diode, which is a common application for regulating voltages in devices and processes. Zener diodes are reverse biased, so they are not typically used as power diodes. The device has a built-in, voltage-stabilizing mechanism and is often used as a voltage regulator in a wide variety of systems.

A Zener diode provides current in a reverse polarity, which allows it to maintain a regulated voltage. The regulated voltage is determined by the breakdown voltage of the diode. The PDZVTR6.2A has a breakdown voltage of 6.2V, which means that it will regulate a voltage to be no higher than 6.2V. In addition, the device can handle up to 800mA of continuous current, making it ideal for moderate current applications.

The PDZVTR6.2A is designed with a high power dissipation of 900mW. This makes the device well-suited for high frequency pulsed and other applications where a high power dissipation is required. The device also has a low maximum reverse-leakage current, and a voltage regulation ratio that is independent of temperature.

The PDZVTR6.2A device is commonly used in voltage regulation applications such as power supplies, battery chargers, automotive systems, and digital electronics. It is also often used as a current shunt for measuring current in applications where a precisely regulated current is necessary.

The device can also be used as a voltage reference in applications where a stable reference voltage is required. It can also be used to limit the voltage used in a particular circuit, ensuring that it remains within a safe range.

The working principle of a Zener diode is based on its breakdown voltage. When the reverse bias voltage exceeds the breakdown voltage, the diode switches to a state of conduction, allowing current to flow through it. This current is limited by the device’s built-in resistance, which creates a voltage drop that is stabilised at the breakdown voltage.

In addition, when the forward bias voltage applied to the diode is above the breakdown voltage, the diode will act as a short circuit, allowing the full forward current to pass through. This current is then limited by the device’s built-in resistance.

The PDZVTR6.2A is a reliable, cost-effective diode designed for voltage regulation in moderate current applications. It is useful in a wide variety of systems and provides a stable output voltage. The device can be used as a current shunt or a voltage reference, as well as providing over-voltage protection and voltage regulation.

The specific data is subject to PDF, and the above content is for reference