PL600-27TSC-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the field of Clock/Timing, Clock Generators, PLLs, Frequency Synthesizers are all important components. This article will focus on the application field and working principle of PL600-27TSC-R.

PL600-27TSC-R Overview

PL600-27TSC-R is a frequency synthesizer with integrated Dual-Loop Frequency Synthesis. It is a single chip solution intended for WCDMA base-station applications. PL600-27TSC-R can be programmed with voltages as well as software. It makes possible frequency synthesis with wide range, high performance, low complexity, and additionally extended control of cell sites. This frequency synthesizer has several key components, each of them explained below:

• Fractional-N Synthesis with up to 27.5 GHz reference frequency: PL600-27TSC-R has a complex fractional-N algorithm from a wide range of references frequency (12.8 to 27.5 GHz). The reference frequency range varies depending on version.
• Fully Time-Division Duplex (TDD) support with symmetric Tx and Rx: PL600-27TSC-R supports single reference frequency operation with wide range. This allows it to be used for both TDD and FDD reception of WCDMA signals.
• TX Burn-in and automatic frequency compensation: PL600-27TSC-R provides an efficient solution to reduce component-induced noises. This is especially useful when working with a high-gain antenna on the Tx section.
• Software control to tune and modify channel properties: PL600-27TSC-R utilizes advanced software tools and control algorithms to support both narrowband and wideband modes. This allows tuning of channel parameters such as channel bandwidth and power.
• Integrated loop filter, voltage-controlled oscillator, and dividers: PL600-27TSC-R has an integrated VCO and divider which provide precise and stable frequency synthesis. The DVCO loop filter is provided for accurate and stable regulation of frequency.

PL600-27TSC-R Working Principle

The PL600-27TSC-R utilizes fractional-N frequency synthesis to generate stable and accurate frequency. The fractional-N frequency synthesis is based on the principles of phase-locked loop. The phase-locked loop (PLL) is a system comprising of four main components, which are the phase detector, low pass filter, voltage controlled oscillator and dividers.

The phase detector takes the input reference signal and input generated signal. It functions by comparing the phase difference between the two signals and outputs the error signal. This error signal is then passed through the low pass filter which filters out high-frequency background noise.

The filtered error signal is then used as the input to the voltage-controlled oscillator. The voltage-controlled oscillator then generates the desired output signal. The output signal is then divided to be used as the input reference signal to the phase detector.

The PL600-27TSC-R fractional-N frequency synthesis is based on this phase-locked loop concept. It uses the phase detector and low pass filter to ensure accurate and stable frequency. The output from the voltage controlled oscillator is then divided by the dividers to generate the desired output frequency. Additionally, the PL600-27TSC-R also has advanced software control tools for tuning and modifying channel properties.

Applications of PL600-27TSC-R

The PL600-27TSC-R provides an excellent solution for WCDMA base-station applications. It can be used in both TDD and FDD reception of WCDMA signals. The integrated loop filter and voltage controlled oscillator provides accurate and stable frequency synthesis. Additionally, the software control tools allows for tuning and modification of channel parameters. This makes it ideal for high gain antenna applications in radio transmission and reception systems.

PL600-27TSC-R is also suitable to be used in mobile communication systems. It provides advanced control algorithms that enable narrowband and wideband operation. This allows for better control and efficient modulation of transmission. With its high performance and low complexity, the PL600-27TSC-R is an ideal choice for network operators looking for cost-efficient WCDMA base station solutions.

Conclusion

In conclusion, this article has discussed the application field and working principle of PL600-27TSC-R. PL600-27TSC-R is a frequency synthesizer with integrated Dual-Loop Frequency Synthesis intended for WCDMA base-station applications. It utilizes fractional-N frequency synthesis which is based on the principles of phase-locked loop. The PL600-27TSC-R provides efficient control algorithms and integrated loop filter and voltage controlled oscillator for efficient frequency synthesis. It is suitable for both TDD and FDD reception of WCDMA signals. Additionally, the software control tools enable efficient tuning and modification of channel parameters. This makes the PL600-27TSC-R an excellent choice for high gain antenna applications in radio transmission and reception systems.

The specific data is subject to PDF, and the above content is for reference