Q8008VH3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are among the most widely used semiconductor devices. Thyristors are used in a wide variety of applications, including lighting, automotive, industrial, and power management systems. TRIACs (Triode for Alternating Current) are a type of thyristor that have two alternately reverse-conducting terminals, referred to as "main" and "auxiliary" terminals. The Q8008VH3 is a type of TRIAC, specifically designed for applications where very low dissipation is required. As such, the Q8008VH3 is ideal for controlling AC loads in consumer electronics, lighting, domestic appliances, and many other electrical applications.

The Q8008VH3 is designed to switch both positive and negative half-cycles of an AC wave, making it suitable for both AC and DC control applications. PET (Phase-Eliminating Trigger) technology enables triggering at any point on the AC wave, with just one gate pulse. This eliminates the need for special switch adaption and control electronics, steps which are usually required for operation of PAIs (Phase-Alternative Inputs). This makes the Q8008VH3 ideal for use in smart grid applications, in which the exact timing of operation is essential.

The working principle of the Q8008VH3 is based on the forward current conduc-ting state of the thyristor. The device is connected to a power source, to which an AC voltage is applied. The oxide layer between the anode and gate terminals then becomes conductive, and the current flows through the device. By controlling the current through the oxi-de layer, the Q8008VH3 is able to control and regulate the AC wave. As such, the Q8008VH3 is able to control and regulate the current output from a power source. The device can also be used in AC detection and control applications, where the output of the device is used to switch the AC signals for application-specific purposes.

The Q8008VH3 is capable of controlling AC signals up to 25A and 600V for applications involving power management, switching, dimming, and detection of AC signals. The device is also suited for safety systems, such as emergency lighting and fire protection systems. The Q8008VH3 can be connected in series and in parallel, making it ideal for use in a wide range of applications. The device has a wide range of operating temperatures and is highly immune to thermal shocks, making it suitable for use in extreme environments.

In conclusion, the Q8008VH3 is a type of TRIAC that has been specifically designed for applications requiring low dissipation and AC control. PET technology makes it ideal for use in smart grid applications and AC detection systems. It is capable of controlling AC signals up to 25A and 600V, and is suitable for use in series and in parallel. The device is also highly immune to thermal shocks, making it suitable for use in extreme environments. Overall, the Q8008VH3 is a versatile and reliable device for controlling AC signals in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference