RM24C64C-LCSI-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RM24C64C-LCSI-T is a 64 Kbit serial Electrically Erasable Programmable Read-Only Memory (EEPROM) used for storing user-defined data. It is fast, non-volatile data storage option for embedded systems, and many other applications. The RM24C64C-LCSI-T utilizes a two-wire serial communication interface compatible with the I2C protocol. It is capable of up to 6.25Mbps data rate.

The RM24C64C-LCSI-T has a wide range of applications, including but not limited to: embedded devices, consumer electronics, automotive, industrial, and medical systems. Additionally, its small size and low power consumption make it suitable for portable devices and other applications with space or power constraints. Further, its two-wire serial interface, as well as its wide temperature range, makes it useful for communication between multiple devices in different locations.

The RM24C64C-LCSI-T consists of 64Kbits organized as 32,768 words of 8 bits each. Eight bits are organized into a single byte; the number of bytes in each row can vary from 8 to 8K bits. Each byte can be written and reprogrammed with I2C protocol instructions. The RM24C64C-LCSI-T is fast enough to allow up to a 6.25 Mbps data rate. This allows for rapid data transfer between a host device and the memory chip.

The RM24C64C-LCSI-T has two communication methods: two-wire serial and three-wire serial. In two-wire serial, the chip is connected to a host processor through two wires. This requires only minimal resources, as the host processor handles communication and data transfer. In three-wire serial, the chip is connected to a host processor through three wires. This requires more resources, as the host processor handles communication and several additional chips are required to control data transfer.

The RM24C64C-LCSI-T has two distinct working modes: page writing and single-word programming. In page writing, a single page word, which can contain up to 128 bytes, can be written by sending the appropriate instruction to the memory chip. Single-word programming allows for the writing of one byte at a time in the memory. This is achieved by sending the instruction followed by the address and data to be written.

The RM24C64C-LCSI-T also features an array of features that increase its reliability and data security. The RM24C64C-LCSI-T is protected from accidental writes with a write protect (WP) pin and an erase protect (EP) pin. The WP pin prevents unauthorized access to the memory while the EP pin protects the data from accidental erasers. Data security is also increased through the chip\'s self-timing feature, which ensures that the data is written at the correct time.

The RM24C64C-LCSI-T is a reliable, fast, and secure data storage option for embedded systems and many other applications. With its two-wire serial communication protocol and its wide range of features, it is ideal for applications requiring high data transfer speeds, low power consumption, and small size. These features make the RM24C64C-LCSI-T an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference